K141 head washers and spacers query

[topconker]

OK, so I know I should have taken a photo when I removed the head, but I didn't, DOH!
Can't for the life of me rememeber where the spacers go, tried to find a schematic but there doesn't appear to be one antwhere in the ether, can anyone help please?
TC

 

[Rivets]

I’m guessing you have 2 thick spacer/washers you are talking about. If I am correct they will be installed on the two bolts closest to the exhaust valve. This manual might help you out. https://www.mymowerparts.com/pdf/Ko...al-K91-K141-K161-K181-K241-K301-K321-K341.pdf

 

[Romore]

IIRC, the spacers go under the fuel tank support bracket, if your engine doesn't have one the just use them with the longer bolts.

 

[topconker]

OK I'll take a look. At the moment I have the cowl on top of the spacers then the tank support on top of them

 

[Rivets]

Couple of pics of what you have will help.

 

[topconker]

I Have pics but the site says they are too big, I'll post them if someone lets me know how

 

[topconker]

 

[Rivets]

Spacers go under the shroud so it will tighten flat. Washers will go under each nut.

 

[topconker]

Thanks guys, looks like I guessed right