Export thread

JD E100 Carburetor Solenoid Melted

#1

C

Caiti92

Hey everyone,

Was mowing my yard today and my 3 year-old JD E100 mower suddenly cut off and I could smell smoke. Took a look at the engine and noticed smoke coming from the carburetor solenoid wiring when attempting to crank it. We’ve ordered a replacement part but I was wondering what could have caused this? The air filter looked pretty rough so we changed that out. We also noticed some soot-looking buildup around the wiring connector. Pic attached.

I was wondering if anyone had any input on this issue and how to prevent it?


#2

ILENGINE

ILENGINE

That makes 5 that I have heard about this year, and the second one this week on this very forum.



#3

B

bertsmobile1

You had a short at the solenoid
Not particularly common but does happen
check the plug that goes into the solenoid
The wires may need to be replaced


#4

StarTech

StarTech

It happens especially with the Ruixing carbs. It is the reason I have the terminals and housings for repairing this damage. These solenoid short out and we are just very lucky they don't cause a major gas fire.


Top