hustler fastrak clutch switch

joey graham

Forum Newbie
Joined
Jun 21, 2012
Threads
1
Messages
1
i turned off the keyswitch before disengaging the clutch switch on my hustler fastrak, now it will not start. i've pushed the clutch switch down, when turning the key switch, nothing. any clues?
 

KennyV

Lawn Pro
Joined
May 5, 2010
Threads
26
Messages
5,447
WELCOME to LMF..

Turning off the key before stopping the PTO will not harm anything...
You may have an interlock switch giving you this problem.
Hold the key to Start & pull the clutch switch out and push it in while holding the key switch to start. It may be that switch that's causing the problem... :smile:KennyV
 

Streamlight

Member
Joined
Nov 11, 2011
Threads
2
Messages
28
I had intermitent starting problems with mine, I ended up replacing two relays and the clutch engagement switch for about $20.00 total.

The original relays were Bosch at about $15.00 a piece, I cross referenced them to Stens and got two for $12.00. Also found the Stens version of the clutch switch.

Also about two years ago I put in a starter assist kit, Hustler #107910.
 

Sturno

Member
Joined
Jun 16, 2016
Threads
1
Messages
17
I had intermitent starting problems with mine, I ended up replacing two relays and the clutch engagement switch for about $20.00 total.

The original relays were Bosch at about $15.00 a piece, I cross referenced them to Stens and got two for $12.00. Also found the Stens version of the clutch switch.

Also about two years ago I put in a starter assist kit, Hustler #107910.

How hard is it and time involved for this clutch switch to swap out? thnx
 
Top