About six years ago I was gifted a Husqvarna TYTH20K46 with a Kohler engine that had thrown a rod. I thought, sweet I'll have the janky mower shop down the street throw in a used motor for cheap and I'll be all set. Well it kind of went that way but now six years later that motor is toast. They swapped in a very tired 25 HP (yard man) V-twin Briggs. I have recently purchase a brand new 20HP v-twin Briggs as the price was great, I knew the shaft and mounting was the same and I assumed since they already converted to a Briggs that would be easier. Problem now is that I just flat out cant wrap my head around the wiring and really hoping someone here can help a guy out.
first pic is the existing Husqvarna wiring harness that went to the last Briggs motor (orange and purple were merged with one wire from previous motor) on the left and the new Briggs harness on the right. (Grey, black, green, orange, red)
second pic is the info for the new motor
3rd pic is of the old Briggs motor (conveniently upside-down)
Really hoping someone here can help me out as my lawn is looking pretty wild at the moment!
Thank you.
first pic is the existing Husqvarna wiring harness that went to the last Briggs motor (orange and purple were merged with one wire from previous motor) on the left and the new Briggs harness on the right. (Grey, black, green, orange, red)
second pic is the info for the new motor
3rd pic is of the old Briggs motor (conveniently upside-down)
Really hoping someone here can help me out as my lawn is looking pretty wild at the moment!
Thank you.