Hrr 216 height adjustment axle

[ihor hnytka]

Does anyone know what keeps the height adjustment ankle from coming off the holder. I noticed on a parts schematic
That there is a 25 mm c clip. Is this clip used to keep this axle on the holder? Thanks, Ihor

 

[robert@honda]

Does anyone know what keeps the height adjustment ankle from coming off the holder. I noticed on a parts schematic
That there is a 25 mm c clip. Is this clip used to keep this axle on the holder? Thanks, Ihor

The HRR216 comes in almost a dozen flavors; got a serial number off the back of the mower deck?

Does yours have a single lever for the rear height adjuster? What part(s) shown here are giving you trouble?

 

[mechanic mark]

Click on members top of page & send robert@honda your message with all numbers from mower, not just HRR216. Example: HRR216VK9A MZAMXXXXXXX. Click on R's then page 97 bottom of page.

 

[ihor hnytka]

Click on members top of page & send robert@honda your message with all numbers from mower, not just HRR216. Example: HRR216VK9A MZAMXXXXXXX. Click on R's then page 97 bottom of page.

Part 1 axle detaches from part 7 Holder causing one side to drop

 

[ihor hnytka]

Click on members top of page & send robert@honda your message with all numbers from mower, not just HRR216. Example: HRR216VK9A MZAMXXXXXXX. Click on R's then page 97 bottom of page.

Will look up model numbers

 

[BlazNT]

Two part number 7. Which one do you mean?

 

[robert@honda]

Part 1 axle detaches from part 7 Holder causing one side to drop

Ensure the bolts holding on #7 are secure, and there's no damage to #7 or the hole in #1 where it fits. Inspect for any loose fit, sloppy fit, bent or damaged parts.