HRM215 SXA self-propel needs help

J

JohnP

Member
I have an older HRM215 SXA mower. The self-propel mechanism works but sometimes it slips, more so when the bag gets full, and requires me to help it by pushing to get the mower started. Does anyone know the cause? Could it be a slipping belt or is it likely something more serious? Thanks.

JP
 
JohnP said:
I have an older HRM215 SXA mower. The self-propel mechanism works but sometimes it slips, more so when the bag gets full, and requires me to help it by pushing to get the mower started. Does anyone know the cause? Could it be a slipping belt or is it likely something more serious? Thanks.

JP
Click to expand...

There are some things to check on this model for poor drive performance, but it depends on which batch/version you have. Share the full serial number with me, and I'll pull up the service details.

For example, early production models had a drive clutch lever that could break at a weld, causing less the full engagement of the clutch.

lmserialnumber_zps63822669.jpg
 
Tom,

I checked the cable adjustment and it is to spec.

Robert,

Frame s/n is MZBB-6004054.

Thanks for your help!

JP
 
JohnP said:
Tom,

I checked the cable adjustment and it is to spec.

Robert,

Frame s/n is MZBB-6004054.

Thanks for your help!

JP
Click to expand...

Okay, so that's a "K0" or first production model of the HRM series.

First thing to check is the drive clutch lever/bar on the handlebar for broken/bent weld joint. This would prevent the cable from fulling engaging the transmission...seem like if the cable is adjusted to spec, it should not matter, but check it anyway to be sure:
27584527485_72de5d3c3d_o.png


Next, the shop manual say to check the drive belt, then for a possible internal fault in the trans. Early versions of this Tuff Torque transmission had service parts, but they have long been discontinued, so now only an entire replacement transmission is available. :mad: Honda Part Number 06200-VE2-802 list price $139.29.

Looks like you are the original owner, John? 5/1/1992...still on Union Street? Almost 25 years is pretty good service for a mower transmission. If the rest of the mower is in good condition, might be worth throwing in a new trans.
 
Tom,

I stand corrected. I thought the cable was adjusted correctly but tightening it solved the problem. Thanks for the suggestion!

Robert,

Yes, I'm the original owner. No longer on Union Street but now live only about a mile away. It has been a great mower. Only repair up til now has been to replace the coil.

John
 
You must log in or register to reply here.
Back
Top