Export thread

honda 6.5 wiill not start

#1

C

cheider

I have a honda 6.5 that I just tore apart and replaced all the gaskets. To be clear it was a complete tear down. I put it back together but it will not start. I dont not have it mounted at this time but disconnected the ground. I have fuel and spark.

Any suggestions would be appriciated


#2

jroske

jroske

cheider said:
I have a honda 6.5 that I just tore apart and replaced all the gaskets. To be clear it was a complete tear down. I put it back together but it will not start. I dont not have it mounted at this time but disconnected the ground. I have fuel and spark.

Any suggestions would be appriciated
Click to expand...

Make sure you have compression and spark. Did you torque everything to specs so there are no leaks and tight seals? Try giving it a shot of carb cleaner in the carb and turn it over. If it fires you have a carb issue.

Joe


#3

bwdbrn1

bwdbrn1

Timing marks lined up and valves adjusted correctly when putting it back together?


#4

reynoldston

reynoldston

Fuel and spark, add two more things and it will run compression and timing


Footer Links 1

Top