I have a 1994 Honda H4514H that will not start. I originally had no spark and found that I had a bad ignition coil. Replaced and I now have spark. The motor will turn when cranking but will not start. I am adding fuel directly into carb and have added fuel directly to the combustion chamber by removing plugs but still no start. Without having a schematic of the combination relay I am stuck. Does anyone have any suggestions?
PS: Timing has been confirmed by putting pistons to top and cam gear alignment arrow on the block is pointing directly at the T on the cam gear.
PS: Timing has been confirmed by putting pistons to top and cam gear alignment arrow on the block is pointing directly at the T on the cam gear.
Last edited: