Help please

[Teresak]

I have a ltx 1045..I mowed the other day and mower was fine. Tried to start last night and it didn't want to start, but finally did. Oil light came on so I killed it, went out today added oil,but now it will not start. Bought new battery but still nothing. No lights come on the dashboard.it only clicks

 

[bertsmobile1]

Start by trying to turn the engine over by hand.
If you can not turn it with palm pressure on the debris screen remove the spark plug & try again.
How much oil is in the engine now & how much was in there before you added oil.

 

[Teresak]

Start by trying to turn the engine over by hand.
If you can not turn it with palm pressure on the debris screen remove the spark plug & try again.
How much oil is in the engine now & how much was in there before you added oil.

I can turn the crank..oil was low but it is full now. Haven't removed spark plug yet

 

[bertsmobile1]

Simple to check.
Run a jumper from your battery - to the engine block.
Mower starts fine = bad ground

Run a jumper from your battery + to the hot side of the solenoid
Starts fine = bad power supply wire

Do the same as above to the starter side of the solenoid
Starts fine = duff solenoid
Dosn't start properly = duff starter