Help Please Briggs 24 hp carb question

[semerm12]

I have a briggs 24 hp twin engne. I am cleaning the carb and when I took off the plastic float mechanism, a small jet fell out before I could see its location and orientation, In looking online at the diagrams, I still cannot figure it out. It fits in several differene spots. Does anyone know where it goes? Your expedited reply is appreciated.

PIcs for reference.

 

[ILENGINE]

Down the center hole in your second picture with the o ring facing down so it sits into the recess in the bottom.. Then the emulsion tube on the main carb body holds it in place.

 

[StarTech]

And that jet needs a new O-ring.