Greasing zerk nearest deck on Turf Tiger

B

Bobby Boyd

Active Member
I finally was able to get grease into the zerk nearest the deck and see what i was doing at the same time. Lowering the deck helped. Previous post on here helped alot also, especially on how to move the pto shaft so I could see the zerk.

Thanks to everyone who helped,

bb
 

Attachments

  • IMGP2862.jpg
    IMGP2862.jpg
    142.1 KB · Views: 36
reminds me off my truck which is a pain to grease i got to drop the drive shaft to grease the zerks on universal joints.
 
It can be a pain sometimes to get to some of these grease fittings, but it is ALWAY worth the time and effort to get it done RIGHT. My feeling is that it is a whole lot cheaper to take time to do proper maintenance than to replace the equipment or parts when they fail. :smile:
 
east_tn_emc said:
It can be a pain sometimes to get to some of these grease fittings, but it is ALWAY worth the time and effort to get it done RIGHT. My feeling is that it is a whole lot cheaper to take time to do proper maintenance than to replace the equipment or parts when they fail. :smile:
Click to expand...

If you can't get to a zerk time to do something about it. Get an angled zerk. Or use a needle that you use for u joints
 
You must log in or register to reply here.
Back
Top