Can anyone give me an idea why I have gas in the oil pan of a Tecumseh 10hp engine that is on a Craftsman lawn tractor, 1985 model. I am also looking for help on the governor how it is connected. I have never work with this and looking for someone who knows how to connect.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
GAS IN THE OIL PAN
- Thread starter Tedws
- Start date
Fuel in the crankcase is caused by a bad float needle and seat. Will need to replace and then change to oil. This manual may help with the governor question. You didn't post any model numbers so I am assuming you have an L-head engine.
http://dl.dropboxusercontent.com/u/12502267/Tecumseh/Tecumseh L-Head.pdf
http://dl.dropboxusercontent.com/u/12502267/Tecumseh/Tecumseh L-Head.pdf
Fuel in the crankcase is caused by a bad float needle and seat. Will need to replace and then change to oil. This manual may help with the governor question. You didn't post any model numbers so I am assuming you have an L-head engine.
http://dl.dropboxusercontent.com/u/12502267/Tecumseh/Tecumseh L-Head.pdf
The model # that is on top of the cal of the flywheel is 143.406022 and the ser. # 10650 I would send a picture but I dont know how.
Your Tecumseh model number is TVXL220-157205A. Should be covered in the manual I posted.
Rivet, THANK YOU SO MUCH. Tedws