Hey all, Im swapping out an engine on a chipper shredder, and have to go from a 1 7/16in shaft down to a 1in shaft. I know they have adapters, but I cant source the exact one. Are there other options out there?
Is it a direct shaft to shaft connection ? You might have to build one using a yoke that fits each shaft with a U-joint in between them. Granger or an Ag-Supply shop should be able to help you.
Tom
#3
Carscw
I know Briggs makes then to go from a 3/4 inch shaft to make it a one inch shaft. Not sure if they make what you need.
Search eBay
