Export thread

If there is anyone who has one of the dixon transaxle adjustment tool that could give me the measurements for the rubber spring load adjustment and the front arm height... or a scan or copy of the tool itself so i can make my own I would really appreciate it.

I found this for you. Just a combo square needed.
Standard Transaxle Adjustment for Dixon Mowers

odi174 said:

If there is anyone who has one of the dixon transaxle adjustment tool that could give me the measurements for the rubber spring load adjustment and the front arm height... or a scan or copy of the tool itself so i can make my own I would really appreciate it.

Click to expand...

Hi there, I have what you need plus a whole write up on adjustment/overhaul. send me your email and I'll get it right off. I also have a DVD that I'll mail you if you send mailing address. Lord bless-brodave

Thanks for everyones help and suggestions. This is a great forum.

This post covers the exact same thing I am looking for, I was wondering if it would be possible to have the same info sent my way that got sent to odi174 by (brodave). I would more than appreciate it if one of you would again be willing to share the measurements on the adjustment tool for the dixon transaxle..

i would be more than happy to forward it to you when I get it.

Tthpmultiplyer said:

This post covers the exact same thing I am looking for, I was wondering if it would be possible to have the same info sent my way that got sent to odi174 by (brodave). I would more than appreciate it if one of you would again be willing to share the measurements on the adjustment tool for the dixon transaxle..

Click to expand...

Did you ever get what you're looking for? Let me know and I'll get it off.LORD bless-bodave

I have found the instructions on how to adjust it, if you have the measurements of the Adjustment tool or a photo copy or scan that i can get them from that would be a great help.

odi174 said:

If there is anyone who has one of the dixon transaxle adjustment tool that could give me the measurements for the rubber spring load adjustment and the front arm height... or a scan or copy of the tool itself so i can make my own I would really appreciate it.

Click to expand...

Send me an email address and I'll send you measurements needed. LORDbless-brodave

brodave said:

Hi there, I have what you need plus a whole write up on adjustment/overhaul. send me your email and I'll get it right off. I also have a DVD that I'll mail you if you send mailing address. Lord bless-brodave

Click to expand...

Hey Mr. Brodave, I've been looking for this information also
I have a 2000 dixon ZTR 3014 that I need to adjust the z-drive on.
I would greatly appreciate it if you could also send this info to me!
My email address is yellerjacket36110@gmail.com
Thanks, Rick

bigrickdba said:

Hey Mr. Brodave, I've been looking for this information also
I have a 2000 dixon ZTR 3014 that I need to adjust the z-drive on.
I would greatly appreciate it if you could also send this info to me!
My email address is yellerjacket36110@gmail.com
Thanks, Rick

Click to expand...

Rick, Please send me a phone no. My cell is 409 382 9309-brodave

My email address is dlp571@frontier.com and I have a 2003 Dixon 4223 and Dixon says it requires 2 gauges to adjust the transaxle, one of them, a person can substitute a square instead, but how about the second one, I need the gauge to adjust the Rubber Spring Assemble height, can anyone please send me a copy of it, please thanks

brodave said:

Hi there, I have what you need plus a whole write up on adjustment/overhaul. send me your email and I'll get it right off. I also have a DVD that I'll mail you if you send mailing address. Lord bless-brodave

Click to expand...

Would you have the measurements or a copy or a way for me to come up with the two adjustment gauges or tools I need to complete the bench setting on my 2003 Dixon ZTR 4423 transaxle, if you do I would really appreciate it, my email address is (dlp571@frontier.com), please help if possible and thanks
Donnie

brodave said:

Hi there, I have what you need plus a whole write up on adjustment/overhaul. send me your email and I'll get it right off. I also have a DVD that I'll mail you if you send mailing address. Lord bless-brodave

Click to expand...

Hello, I know this is a long shot, but do you still have the measurements for the adjustment tool.

Hi Guys,

I´am Sascha from Germany and since yesterday I am the proud owner of a Dixon 3014. The Engine works nice and the whole mower looks like brand new but there are some issues with the Z-drive, it seems someone tried to adjust it but totally screwed up.

Is there the possibility to receive the Measurements of the Dixon Gauges along with the written procedure as well?

I would really appreciate your help as the support for this wonderful machines is extremely poor in Europe.

Thanks in advance!!!

Sascha

brodave said:

Hi there, I have what you need plus a whole write up on adjustment/overhaul. send me your email and I'll get it right off. I also have a DVD that I'll mail you if you send mailing address. Lord bless-brodave

Click to expand...

I am looking for these specs as well I know this post is old but am wondering if someone still has the info so I can make my own tools to adjust thanks

boynton69 said:

I am looking for these specs as well I know this post is old but am wondering if someone still has the info so I can make my own tools to adjust thanks

Click to expand...

kayla.boynton069@ gmail.com is my wife's email thanks

I wish someone would just post those dimensions on here instead of everyone asking to have them sent to a private e-mail
I mean really...I think it's easier to get nuclear launch codes than those 3 dimensions...what's the big secret? LOL
jbones454@comcast.net

2000 Dixon ZTR 3304. Looking for the two dimensions of the smaller adjustment gauge. The one that looks like a "C". Length and width of the "C" notch so I can make one.
Thanks Dave.
daunkst1@yahoo.com