walter lewis
Forum Newbie
I changed the oil seal in my hydro pump put every thing back to gather started the purge process now the pump[s are getting hot. What did I miss?.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Dixie chopper hydro pumps getting hot.
- Thread starter walter lewis
- Start date
-
- Tags
- dixie chopper
mechanic mark
Lawn Pro
Manuals | Dixie Chopper locate your manual, then search for hydro pumps servicing & purging.
Did you try running the machine? May be air bound.
Look in the reservoir and see if there are air bubbles.
Is it possible it's idling longer than you usually let it? Could be the bypass is causing it to heat up.
I've had this before. Sometimes if you let it sit, it burps itself out.
I'd have to see the manual, but it's basic hydraulics.
Look in the reservoir and see if there are air bubbles.
Is it possible it's idling longer than you usually let it? Could be the bypass is causing it to heat up.
I've had this before. Sometimes if you let it sit, it burps itself out.
I'd have to see the manual, but it's basic hydraulics.
mechanic mark
Lawn Pro
http://service.mtdproducts.com/Training_Education/769-07813.pdf not your mower, same principle, read through this & see if it helps.
http://service.mtdproducts.com/Training_Education/769-07813.pdf not your mower, same principle, read through this & see if it helps.
Thanks Mark
That brought up a new thought. You using the correct oil?