paulhummel
Forum Newbie
Any of you experience the inability to raise the desk to its full height? Currently I am unable to bring the deck up over 2 1/2" Looking underneath, I cannot see any obstructions to the deck. Any Suggestions?
Deck Raising rpoblems - Cub Cadet XT1 42" Deck
- Thread starter paulhummel
- Start date
https://www.tractorsupply.com/static/sites/TSC/downloads/ProdContentPDFs/1110274_Man1.pdf
read pages 24 & 25
i believe your tractor is still under warranty 3 years for residential, i would call tech support or contact them online. let us know what problem is & how to fix, thanks, Mark
read pages 24 & 25
i believe your tractor is still under warranty 3 years for residential, i would call tech support or contact them online. let us know what problem is & how to fix, thanks, Mark
Last edited:
paulhummel
Forum Newbie
Thank you for your suggestion...However the problem is getting a full raise with the lever. It currently is not passing the 2 1/2 inch mark on the raising lever. Its like it is being interfered with. I just cannot see where. The deck did previously raise to full height prior to changing the blades.
bertsmobile1
Lawn Royalty
Have you hooked up the deck assist spring ?
Are the lift arms fitted correctly in the slots on the deck ?
If your deck has the single drag link at the front. it can be fitted backwards and foul on the pulley.
Are the lift arms fitted correctly in the slots on the deck ?
If your deck has the single drag link at the front. it can be fitted backwards and foul on the pulley.