Deck Raising rpoblems - Cub Cadet XT1 42" Deck

[paulhummel]

Any of you experience the inability to raise the desk to its full height? Currently I am unable to bring the deck up over 2 1/2" Looking underneath, I cannot see any obstructions to the deck. Any Suggestions?

 

[mechanic mark]

https://www.tractorsupply.com/static/sites/TSC/downloads/ProdContentPDFs/1110274_Man1.pdf

read pages 24 & 25

i believe your tractor is still under warranty 3 years for residential, i would call tech support or contact them online. let us know what problem is & how to fix, thanks, Mark

 

[Catherine]

:welcome:

Welcome to the forum!

I'm going to move this thread over to our Cub Cadet section.

 

[paulhummel]

https://www.tractorsupply.com/static/sites/TSC/downloads/ProdContentPDFs/1110274_Man1.pdf

read pages 24 & 25

Thank you for your suggestion...However the problem is getting a full raise with the lever. It currently is not passing the 2 1/2 inch mark on the raising lever. Its like it is being interfered with. I just cannot see where. The deck did previously raise to full height prior to changing the blades.

 

[bertsmobile1]

Have you hooked up the deck assist spring ?
Are the lift arms fitted correctly in the slots on the deck ?
If your deck has the single drag link at the front. it can be fitted backwards and foul on the pulley.