Mudface777
Active Member
Alright thanks I will have to pick some up.
Craftsman Chipper/Vac trouble
- Thread starter Mudface777
- Start date
Mudface777
Active Member
Hey I changed the plug but no fire, What next?
AnthemBassMan
Well-Known Member
Have you checked to see if have a good spark yet? I didn't see in any posts earlier that you checked. If you do have good spark, then the next couple of things to check would be compression and the flywheel key. If you don't have spark with the new plug, then it's probably time to look at a new coil.
L8R,
Matt
L8R,
Matt
Mudface777
Active Member
Yea its getting spark but it wont start.
AnthemBassMan
Well-Known Member
If you're getting both fuel and spark, pop off the nut to the flywheel and make sure the key didn't get sheared...
Mudface777
Active Member
I will check it today and I will let you know. Thanks.
AnthemBassMan
Well-Known Member
Did you ever find the problem? Just wondering what it was...
L8R,
Matt
L8R,
Matt
Mudface777
Active Member
Yea it has safety wires to were if the bag is not on it wont start. I always had the bag on but the connection came loose. Idiot Me. lol
AnthemBassMan
Well-Known Member
Hey, no worries. At least it wasn't something major or costly.
L8R,
Matt
L8R,
Matt
Mudface777
Active Member
ea I know tell me about it.