Craftsman 900.370510 emits rhythmic noise

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
116
Messages
12,527
Not 100% sure that the 99502H is the same as the 9502H but makes sense here. Just about any good would have the 99502H bearing as it use in older Murray spindles.

Here is the measurements of the 99502H bearing.

Bearing 99502H, 5/8" x 1-3/8" x 7/16" [ID x OD x H]
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
116
Messages
12,527
Just found the Peer 9502H and the two listed specs matches the 99502H bearings.

1756211918896.png
 

the.doc

Active Member
Joined
Aug 8, 2018
Threads
14
Messages
50
Took a while to get the lower bearing out:
Am I right to think that I really need 99502H-2RS?

Any advice on buying a replacement? There are local suppliers of bearings, but I've never dealt with any of them.
A cursory look on Amazon showed me quite a variety of choices; priced a bit over $10 for one, to about the same money for ten of them. Grateful for any advice.
 
Top