Choke spring location

[Wallus1]

Hi folks. I removed the carb from a B&R model 124707-0215-01 engine that's on an old DR. Power Wagon. The choke return spring fell off and I cannot figure out how to install it. Can anyone come up with a diagram for it. I downloaded the parts manual but although it shows a picture of the spring, it doesn't show how it hooks up.
Thanks, Wally

 

[Scrubcadet10]

I typed in your model number on multiple sites and none of them had the engine with a choke, only Primer....
If this is in deed a auto choke engine, this should help.

 

[Wallus1]

I typed in your model number on multiple sites and none of them had the engine with a choke, only Primer....
If this is in deed a auto choke engine, this should help.

No. It's definitely a manual choke.

 

[Scrubcadet10]

ok my bad, i did not see there were 2 sections in the IPL, one for the choked carb, and one for the primer carb.
Personally i've never worked on one with a manual choke so i can't tell you. but I'll bet you some of the other guys on here can.

 

[Wallus1]

ok my bad, i did not see there were 2 sections in the IPL, one for the choked carb, and one for the primer carb.
Personally i've never worked on one with a manual choke so i can't tell you. but I'll bet you some of the other guys on here can.

Ok, thanks

 

[Rivets]

Maybe this manual will help you out. https://drive.google.com/file/d/0B6NaqjIxWV1ycG8wd0s3Z2Q2X00/view

 

[Wallus1]

Maybe this manual will help you out. https://drive.google.com/file/d/0B6NaqjIxWV1ycG8wd0s3Z2Q2X00/view

Thanks Rivets. It shows where the spring hooks up to the choke lever but not the other end which is the end I need to see. At least it shows the general area and direction that it goes and that's a great help. If anyone has a pick of the other end I would greatly appreciate seeing one.
Thanks, Wally