Change starter.

N

Nick v

Forum Newbie
Joined
Aug 26, 2021
Messages
5
I have to change the starter on my Lt 1000. It appears I have to remove the flywheel to do this.Am I missing something . Most craftsman Lt 1000 machines that I see on you tube have starters that bolt to the side of the motor.if it necessary to remove the flywheel, does anyone know the torque for the center bolt.
 
We can't help you without knowing what engine you are working on. How about a model number of the engine so we can give further information.
 
ILENGINE said:
We can't help you without knowing what engine you are working on. How about a model number of the engine so we can give further informatiSprry
ILENGINE said:
We can't help you without knowing what engine you are working on. How about a model number of the engine so we can give further information.
Click to expand...
Sorry, The engine is a Briggs&Stratton 18hP model 422707
Click to expand...
 
It can be changed without pulling the flywheel, but is a slow tedious process, and is easier if the flywheel is removed. If the flywheel has the big nut then 150 ft/lb. post the rest of the series of numbers behind the 422707 so we can determine if that is correct for your engine. Some of the engines used a bolt instead of the nut.
 
ILENGINE said:
It can be changed without pulling the flywheel, but is a slow tedious process, and is easier if the flywheel is removed. If the flywheel has the big nut then 150 ft/lb. post the rest of the series of numbers behind the 422707 so we can determine if that is correct for your engine. Some of the engines used a bolt instead of the nut.
Click to expand...
The numbers that follow are Type 1264 01 and code 9603135A.. it is a large nut and not a bolt. Thank you for your advice
 
You must log in or register to reply here.
Back
Top