Carburator

rocky4

Active Member
Joined
Jul 16, 2014
Threads
23
Messages
71
Has anyone had a problem with the carburetor on murray riding mower leaking gas at the plastic connector at the carburetor
where the line connects? I have one that the plastic cracked and lets gas leak. I cannot find that item on the parts list.
Is there any way to replace the connector with something else ? Thanks for any suggestions
 

reynoldston

Lawn Pro
Joined
May 23, 2011
Threads
92
Messages
5,705
Good place to start is with a engine brand and model. Part should be replaceable.
 

rocky4

Active Member
Joined
Jul 16, 2014
Threads
23
Messages
71
Good place to start is with a engine brand and model. Part should be replaceable.

This is a Brigs & Stratton engine, Model 313707 0126-E1 17.5 HP. carb is Walbro. If you look up parts for this engine, it does not show the connection for the fuel line.
Thanks for replying
 

ILENGINE

Lawn Royalty
Joined
May 6, 2010
Threads
44
Messages
10,970
Part number 692317 is probably what you are looking for. It is a plastic/brass combination that presses into the carb. It has to be pressed in, can't be turned because it will break the plastic loose from the brass.
 

rocky4

Active Member
Joined
Jul 16, 2014
Threads
23
Messages
71
Part number 692317 is probably what you are looking for. It is a plastic/brass combination that presses into the carb. It has to be pressed in, can't be turned because it will break the plastic loose from the brass.
Thanks for the part number. It is what I need.
 
Top