brickwallross
Forum Newbie
- Joined
- Mar 14, 2021
- Threads
- 1
- Messages
- 3
Hello, I'm new to this forum. As many people start on forums I'm here for some help. I recently replace connecting rods of my kolher 22hp in a cub cadet gt 2550 mower. I purchased the mower hoping the bagger would fit on my new cub, but its a different mount so I decided to fix this one, as it ran it a good job on just one cylinder until the rocker arm fell off the valve. After replacing both connecting rods, and rebuilding both heads and reassembling the entire engine I found, or didn't find I guess, a small bracket that I am unable to find a home for. To me it looks like something for the charging system, but I can not find it on any parts diagram anywhere. It has two, I think 4mm, screws with it an I can not find anywhere of the engine that the hole spacing fits. If anyone has any ideas please let me know, this is not a project I can afford to spend much more on, and taking it to a small engine repair shop around me will put it way over the budget I set. I'm 99% sure this is a CH670 engine about a 2005. The engine info sticker is missing of course. It is a horizontal shaft drive mower with the shaft drive not a vertical drive with belt drive to the hydro pump. Again, If you know what this is please HELP! Thanks for any assistance anyone can provide. Also, sorry for the photos, I couldn't get my phone to take photos with smaller files so they'd upload.