briggs and stratton 24hp engine

S

stuccomanb

Forum Newbie
Joined
Aug 6, 2012
Messages
3
The engine runs a little ruff and I hear a pinging noice. The Engine blows smoke and oil out the dip stick, does this mean I need to redo piston rings?
 
stuccomanb said:
The engine runs a little ruff and I hear a pinging noice. The Engine blows smoke and oil out the dip stick, does this mean I need to redo piston rings?
Click to expand...

I would not use the engine until you have a good look at it, oil coming out of dip stick is back pressure, so well could be the rings, give it a compression test that will tell you a lot.
 
There is also that, thankyou Rivets old age don't come alone...:laughing:
 
Thanks. I did a compression test and looking at engine left side went to 180, the right side was 0. So I'm assuming the rings? Thanks again.
 
I would look at the head gasket and valves first. Cheaper and easier to repair.
 
Do the above, if its 0.psi it may well be the head gasket or valve(s) and not the ring's.
 
I pulled head off and piston was broke pulled off bottom of crank case and rod was broke also. Thanks for the help.
 
You must log in or register to reply here.
Back
Top