Briggs 31R headache...

[slomo]

Carb float height excessive?

 

[StarTech]

Ok so most everything mechanical sounds like it's working as normal.

Dump the gas and try some fresh E-0 unleaded juice.

Wonder if someone, has been in the carb with a welding torch tip cleaner enlarging the main jet/s?

Choke staying wide open once warm?

Look the fuel is fresh and I am the only one been in the carb. And yes the dang choke is fully open. Also main nozzle/jet and air bleed jet have been remove and make they are clean.

Carb float height excessive?

No; unless, you call dead level [parallel to carb body] excessive.

BTW the needle tip has no wear. And it takes a pin punch to even get the pin out. As that is how I got to the needle and seat. Pressure test of 10 psi held over 30 minutes. No fuel in the plastic float.

might as well give these numbers before someone complains.