Export thread

blade engage sensor/switch

#1

B

bm3groovy

I have a Troy Bilt Bronco 17 HP 42 inch cut automatic trans. Problem is, I bent/bowed the blade engage lever. Now I cant start the mower. Can anyone tell me where the safety switch may be or any other remedy to be able to start lawn tractor.

Thanks for your help

Bill Groves


#2

ILENGINE

ILENGINE

How about supplying the model and serial number from under the seat so we can see which of the thousands of possible configurations that your have.


#3

B

bm3groovy

ILENGINE said:
How about supplying the model and serial number from under the seat so we can see which of the thousands of possible configurations that your have.
Click to expand...

Model # SV530

Serial # 4407808363

Thanks for your reply

Bill Groves


#4

B

bertsmobile1

Bill,
That is the Kohler engine numner that came of the decal on the side of the engine.
We need the model & serial from the name plate under the seat.
IT will have TROY_BILT or MTD at the top and their address on the bottom
Usually it is on the body under the seat or under the seat itself.


#5

B

bm3groovy

Model 13WV8KS011

Serial 2D144B70294

Hope this helps

Thanks again

Bill Groves


#6

dougand3

dougand3

Incorrect model #. Could it be 13WV78KS011?


#7

B

bm3groovy

dougand3 said:
Incorrect model #. Could it be 13WV78KS011?
Click to expand...

Yes, you are correct. Typo on my part.


#8

dougand3

dougand3

https://www.partstree.com/models/13...ronco-lawn-tractor-2015/frame-and-pto-lift-2/

#9 is the interlock switch. Wires go to it.


#9

H

howdydoody

dougand3 said:
https://www.partstree.com/models/13...ronco-lawn-tractor-2015/frame-and-pto-lift-2/

#9 is the interlock switch. Wires go to it.
Click to expand...
Newbie here,posted my first post minutes ago. Will the problem being discussed here cause the PTO/blade light to come on when key switch is in start position. If so sounds like my problem also? Sorry if I'm infringing on bm3groovy's post


#10

ILENGINE

ILENGINE

Could be I just added some additional info in your original post and that is where most people will reply to

www.lawnmowerforum.com

No crank,gifted someone else's mightmare

Model 17af2acp001 Serial 1d088g20302 Jumper cables to bat- starter+ = start and runs. Replaced solenoid after it tested bad with used one I had after it passed bench test(auditable click with continuity across big post). Both are 4 wire. Will not click after installation this starter doesn't...
www.lawnmowerforum.com www.lawnmowerforum.com


Footer Links 1

Top