B&S Ignition problems

[BernardLuz]

Hi,
I have a 130G series B&S engine about 7 years old and powering a McCulloch rotavator.
Having established that there was no spark I purchased an OEM ignition coil and a couple of spark plugs for good measure.
I have fitted the new coil, gapped it on the flywheel with a business card but no spark.
I have disconnected the kill wire and still no spark.
Help please

 

[mechanic mark]

Is equipment kept inside shed etc.? Is flywheel rusty or clean?
Post Model xxxxxx, Type xxxx, Trim xx, Code xxxxxxxx numbers from engine & part # from new coil & spark plugs, thanks, Mark

 

[ILENGINE]

Make sure you didn't mount the coil upside down.

 

[BernardLuz]

Is equipment kept inside shed etc.? Is flywheel rusty or clean?

 

[BernardLuz]

Hi mark it is kept under cover but I am in Portugal and it doesn’t rain that much. Flywheel is clean

 

[BernardLuz]

Make sure you didn't mount the coil upside down.

Yep got that thanks