B&S 21000 series

Nickthetaxi

Forum Newbie
Joined
Dec 21, 2023
Threads
1
Messages
2
Hi, new to site so appologies if in wrong place!. Have a ride on mower, with a 2007 B&S 21000 series single cylinder 350cc engine.
Running on SP98 (4*) as only fuel available here without ethenol. Coil died recently and replaced with aftermarket one! Engine coughs and splutters when accelerated too fast (fine if done slowly) Suspect flooding?. Cleaned fuel system, carb,. filter etc., adjusted valve clearances, checked exhaust. Recent problem, but works fine if throttled up slowly. Anyone have experience or suggestions? Cheers NTT
 

Bertrrr

Well-Known Member
Joined
Mar 11, 2021
Threads
5
Messages
570
Is the governor spring and linkage free or possibly sticking ?
 

Nickthetaxi

Forum Newbie
Joined
Dec 21, 2023
Threads
1
Messages
2
Will check tomorrow. Would this not be worst with slow acceleration, if it was sticking?
 

Bertrrr

Well-Known Member
Joined
Mar 11, 2021
Threads
5
Messages
570
Hard to say at this point but I'd still bet on a fuel / carb problem
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
93
Messages
11,598
Try applying a little choke when gun the throttle and see if that helps.
 
Top