I have A 104M02-02230F1 engine, but I cannot find any specs on it. I replaced the pan gasket to check what sounded like a rod knocking. I have no idea what the clunking is, as the rod was fine. I was wondering if anyone might know the sump torque. I just do not want to jack out my aluminum threads with a steel screw. Thanks for any help.
Thanks for the help. It was the compression relief on the cam gear. Replaced the gear, adjusted the valves and started first pull. I was worried at first because the new one didn't look that much different from the suspected one. Must have some difference, because that is all I did. Thank you again. Thanks a bunch for the spec sheet, Star Tech.