arien self propelled will notbrun correctly after blade was reinstalled

groovey

Forum Newbie
Joined
Aug 9, 2014
Threads
1
Messages
2
  • / arien self propelled will notbrun correctly after blade was reinstalled
So I removed the blade and restarted white smoke and would barely run. Have not replaced any parts ie air filter,spark plug float. What is the order clean air filter sparkplug then float?

Thanks,
groovey
 

Lawnboy18

Lawn Addict
Joined
Jul 14, 2013
Threads
85
Messages
1,451
  • / arien self propelled will notbrun correctly after blade was reinstalled
Did you tip it the wrong way while removing the blade? Air filter must always be up to avoid flooding. Did you let it run a while after tipping it? My mower smokes a little sometimes if I tip it.
 

groovey

Forum Newbie
Joined
Aug 9, 2014
Threads
1
Messages
2
  • / arien self propelled will notbrun correctly after blade was reinstalled
Did you tip it the wrong way while removing the blade? Air filter must always be up to avoid flooding. Did you let it run a while after tipping it? My mower smokes a little sometimes if I tip it.
This was tipped foward quite a few times :frown: I let it ran for overt 5mins no power with no rpm increase at all.
 

Lawnboy18

Lawn Addict
Joined
Jul 14, 2013
Threads
85
Messages
1,451
  • / arien self propelled will notbrun correctly after blade was reinstalled
You didn't tip it the right way. When you tip a mower, always tip towards the side and the air filter MUST face up. You probably flooded your motor. Simply remove the spark plug wire and unscrew the spark plug and replace it.
 
Top