Export thread

air cleaner on a kohler engine

#1

R

Roland750

Just checked my air filter and when I removed it I heard what I thought was a washer but turned out to be a 1/4" ball bearing. Engine also won't idle without the choke on about a 1/2" and was backfiring on and off.

Any help would much appreciated.


#2

reynoldston

reynoldston

I sure can't think of where a 1/4" ball would come from? Could someone been playing games with you.


#3

R

Roland750

reynoldston said:
I sure can't think of where a 1/4" ball would come from? Could someone been playing games with you.
Click to expand...

Don't think so......Their is a small tube on the side of the carb that it appears that this ball bearing could fit in.


#4

reynoldston

reynoldston

Have you got a model number, just something I never came across so I can look at a parts diagram. I am sure someone on this forum knows what it is. Maybe some kind of valve and without it you now have a vacuum leak?


#5

R

Roland750

reynoldston said:
Have you got a model number, just something I never came across so I can look at a parts diagram. I am sure someone on this forum knows what it is. Maybe some kind of valve and without it you now have a vacuum leak?
Click to expand...

Model number for the mower is Craftsman 917.27636. The engine is a kohler 25hp v twin.
Really appreciate your help.


#6

reynoldston

reynoldston

Roland750 said:
Model number for the mower is Craftsman 917.27636. The engine is a kohler 25hp v twin.
Really appreciate your help.
Click to expand...

I will need the engine model and number? Maybe some pictures would help. I have had Kohler air cleaners and carburetors apart but never ran across a 1/4" ball bearing. Maybe someone else on this forum knows more then I do on this? I was looking at some Kohler parts diagrams but didn't see what you are talking about.


#7

R

Roland750

reynoldston said:
I will need the engine model and number? Maybe some pictures would help. I have had Kohler air cleaners and carburetors apart but never ran across a 1/4" ball bearing. Maybe someone else on this forum knows more then I do on this? I was looking at some Kohler parts diagrams but didn't see what you are talking about.
Click to expand...

Sorry for the delay.
Model Number for the engine is CV730S and Manufacturer date is 1/06/2006.
I just started it again in and it runs pretty well with the choke out about 3/8 inch. Once I try and push the choke in all the way it starts cutting out and then dies unless I pull the choke part way.


Footer Links 1

Top