Ianwelch001
Forum Newbie
- Joined
- Apr 20, 2021
- Threads
- 1
- Messages
- 3
Hello all!
Having a problem with my 4 year old craftsman mower with the briggs 7.25hp engine.
Haven't used it in over a year now and went to start it and didn't start. Sprayed fluid into the intake and it started for about 2 seconds.
I've cleaned the air filter, changed spark plug, removed old gas and put in new gas, and took apart the Carb and cleaned it. Float, needle, and bowl were all clean. No blockages from the tank to the carb or from the carb to engine.
I'm getting spark, air, but missing the fuel.
Since it runs for 2 Seconds after spraying it I'm lost now.
There's no choke, and is a 1 pull start. I'll get the model as soon as I can.
Thanks everyone
Having a problem with my 4 year old craftsman mower with the briggs 7.25hp engine.
Haven't used it in over a year now and went to start it and didn't start. Sprayed fluid into the intake and it started for about 2 seconds.
I've cleaned the air filter, changed spark plug, removed old gas and put in new gas, and took apart the Carb and cleaned it. Float, needle, and bowl were all clean. No blockages from the tank to the carb or from the carb to engine.
I'm getting spark, air, but missing the fuel.
Since it runs for 2 Seconds after spraying it I'm lost now.
There's no choke, and is a 1 pull start. I'll get the model as soon as I can.
Thanks everyone