52" 21 hp kohler ZTR snapper.

belluser123

Forum Newbie
Joined
Jul 22, 2012
Threads
1
Messages
2
I bought the mower real reasonable. the wrong drive belt was put on it and it was too long. I replaced it with a smaller one that works fine. The mower rolls really easy. It runs good and will turn the wheels if I lift it off the groung,but if I let it down on the ground, it will stop the wheels and go nowhere. I can hear the motor lug a little,but that is all. I was advised that the wheels were knocked out of gear so it will roll,but I can not find a lever or switch of any kind. Can anyone advise me as to what my problem is?
Thanks
Doug
 

EngineMan

Lawn Addict
Joined
Jun 12, 2012
Threads
9
Messages
2,275
You say "replaced it with a smaller one that works fine" but is it the right one..? look at the drive pulley to see if that's turning when the wheel's are not..!
 

belluser123

Forum Newbie
Joined
Jul 22, 2012
Threads
1
Messages
2
thanks for the reply. i found the relief valves for the pumps and turned them in. The mower works fine now,
 

EngineMan

Lawn Addict
Joined
Jun 12, 2012
Threads
9
Messages
2,275
O thats ok then.....:thumbsup:
 
Top