Someone hit something on the parking brake and it put a small crack min the left transmission housing. I took it off and sealed it back up but I would like to know how to tell how much fluid should be in it. I hate to take the other side off and pull it apart to measure the correct amount of oil.
#2
BlazNT
What transmission do you have. Little tag on the transmission.
The seal will probably not hold.
That is a hydro-gear transmission.
Hydro-gear have all of their factory service manuals on line for a free download
Cut & paste this link hydro-gear.com/service-and-repair-manuals
#5
BlazNT
You have the ZT-2200 or EZT
Full is when the oil is 3/4 or an inch below the "Fill Port"
Fill Port is at the top of the main housing. That holds the axle shaft.
