I have a hustler fastrax and used it for about 5 cuttings after purging the system due to a leak at the charge plate and then it would not purge so I bought a new plate, changed the filters and oil and it still will not move
I have a hustler fastrax and used it for about 5 cuttings after purging the system due to a leak at the charge plate and then it would not purge so I bought a new plate, changed the filters and oil and it still will not move
the pump has a hex screw or bolt that requires removal to fill the until the fluid runs out, located at the inside top of the pump. then jack up the back wheels to purge the system. if you took off the bottom plate then you most likely have it on wrong, easy to do, trust me from experience and others in this forum turn the plate around. then purge the system.