10550, getting ready to drill jets...

coolted

Member
Joined
Oct 1, 2011
Threads
3
Messages
14
UPDATE>>>

Ok...So...I put the stock 77.5 jet back in, left the pilot drilled to .015...Still not acceptable, but better. Mowed a big pile of leaves, and after getting through the pile, the rpm's shot up and stayed there. I determined that the governor spring was bad, and when I took it apart it I saw it was tweaked. I replaced the spring and have a nice high and low idle, and surging is intermittant. When a load is on it, I get the power hum which i love soooo much. Gonna be a long wait for the grass to grow this time of year...I am so close.
 
Top