steering

My wife has a lady friend that has a ztr that she just can't get the hang of controlling it with the twin levers. Her neighbor comes over and does the manly thing and mows her yard for her. She would like to do this herself and commented to my wife that she sure wished there was a ztr with a...

hey folks.. ive a columbia brandedlawn tractor model 13ae698g597 serial 2a082I30159 and the steering gear ( on the steer shaft) is fubared.. i cant seem to find anything anywheres it keep comign back as.. not listed.. on pretty much any small engine parts sites ive checked.. at this point.. id...

I have a Craftsman T3000 steering shaft stripped and sector. I replaced both and the bushing. and it still slipping and popping. Am I missing something I need to replace? Thanks

Simplicity 1693601. When I turn the steering wheel all the way to the right I am unable to return the wheels to straight. If I turn steering wheel it just clicks and no movement from the front wheels. If I manually turn the front tires to the left the steering will "catch" and turn normally...

Hello LMF, I have a Simplicity with a steering rod? issue and was wondering if anyone had suggestions. Details: Simplicity Regent B&G 22 HP 44" Cut Part No. 2690575 Serial No. 2012695011 Issue is the steering rod (guessing that is what it is called) has fallen out at the ball joint that...

I have a Craftsman mower where the front tires are bowed out. I have checked tie rods and drag links, and they are tight. The spindles appear to not be bent. There is a lot of front to back play in the "I-beam", but the pivot bolt is tight, also there is a lot of flex in the gear sector. What...

Concerning the little dampers on each steering lever of my mower(XDX), is it possible that the rod could just unscrew itself from the knuckle at the front, as opposed to it being broken? Very low hours, and while I haven’t accessed the damper yet, I can see the threaded end of the rod just...

Had my right steering arm get real loose and floppy while mowing. That steering arm is REAL sensitive and difficult to control so I see why they installed these dampers! Found the damper #603983 is broken after 9 years of use. Raptor SD54 Mower. They are $65 each and with the age of things I was...

My 2007, 48” has steering vibrations when turning either direction but not while moving straight forward or reverse. It doesn’t seem to matter if blades are engaged or not. I also tried it with the clutch removed, it seemed to have been a little less noticeable but still there. I did take the...

I need step by step instructions for adjusting tracking. Mower was drifting to the left, and couldn't remember how a friend that works on lawnmowers showed me to do it. At one point, it just got to where it would make a circle, and when I put it in Park, it was still trying to go. With the...

I have a Toro 5475 Time Cutter, Easy ride zero turn. The right side control arm just flops around. Can use but pretty tricky. Something disconnected or broke. Any ideas?

Hello to everyone, looking for some advise. I have a bit of a problem with my 2004 stiga park pro 20, The power assisted steering is gone knotchy and hardish to turn either way, I have changed the filter and the oil. I think the transmission and the steering share the same system and oil. Has...

Picked up a used GT2100, pretty good shape, mainly looking for a 50" deck to replace a rusted out one on one of my LX500 models. Turns out they aren't interchangeable, GT2100 is a larger/higher tractor, and I discovered the rear life mounts on the deck of the GT2100 are taller. In any...

My Dixie Chopper Right steering control works in Reverse but not Forward. When the throttle is high, I can hear a whining sound when I move the Right steer control forward. Reverse has full power. The Left Steering control has full power in reverse and forward. Hydraulic fluid level is...

My ZT HD only has 65 hours left steering leaver won’t automatically return to natural. When I start it I have to hold leaver to neutral before releasing parking brake, can not find a service manual for it .

Craftsman 917.289272 (YT4000 ??) MFG in 2010. Upgraded front wheel bushings using bearing kit upgrade and added washer bearing also. But now steering control over front wheels has a problem where both front tires direction will suddenly turn just a bit left or right requiring constant steering...

Anyone have a remedy for this annoying squeaky steering shaft bushing? Located under the steering wheel at the shroud.... have tried several types of spray lubes with none - so far, making a difference. (can't hear it while mowing... but I know it's still there...:LOL:) Thanks for any response.

I have a craftsman T3000 steering is slipping and stripping the gears. I replaced both the shaft and the sector alone with the bushing. Made a couple runs and was fine. now doing the same thing. AmI missing something that needs changed? Thanks