carburetor

New poster here. I've enjoyed reading this forum over the years, but never made any posts, but I'm in need of some advice. Background: A few years ago, I bought a Husqvarna YTH2348 with a Briggs engine for $500 from a guy who was moving away and needed to offload it. Right up front, he told me...

This Mule has always run rich and carbon fouls plugs. It’s getting to where it will need rebuilding or replacing. Is there a replacement Walbro carburetor available for this Mule?

Kohler SV540S will turn but not run,changed everything new, head gasket, lapped the valves and gapped, carburetor,air filter,fuel filter,still not run. Shows 65 psi compression. Could it be timing problem.Have not opened engine itself. What else should I check.It was warm then suddenly stops at...

If a carburetor has an electric solenoid that shuts of the fuel when you turn the ignition off. Does it really matter if you use non ethanol fuel or not? When the solenoid is off is is closed and no fuel is in the carburetor so there should be no issue with what type of fuel you use and if you...

I have a Snapper LT 300 made by Simplicity. It has a 20 hp Vanguard twin. I cannot find any info about the carburetor which seems to have no name or model number. Having fuel problems. Does anyone know of a source for info about these carburetors?

Hi all - wondering if there are any of you who may have a good conceptual understanding of the elements in play for my engine problem. The problem is that the machine struggles to start and runs rough. A quick check of the plug confirms rich too dark and not tan colour. Today I went into it in...

First, I'm not a mechanic - just a fairly handy homeowner. I hoping someone here might be able to help. I'm trying to fix my Husqvarna YTH24V48 riding lawn mower with a 44r877 Briggs and Stratton engine. The carb kit, oem part number 593392, works with the B&S "Chok-a-matic" system (which I...

I'm working on the carburetor of my Courage 21. When I go to put it all back together and slide the plastic air cleaner base onto the mounting bolts, the bolt on the right pushes into the engine housing. It's also now somehow shorter in length compared to the bolt on the left, so even if I get...

Hi, a newbie here hoping there is someone out there who can help with a carb issue I'm having. I have a high-quality, old cylinder lawnmower with an Intek engine, which had been left standing for a long time and the carb was completely corroded inside. I replaced it with an aftermarket part...

I have a late 1990s Sears Craftsman string trimmer, model #358.798530. It runs great when I can keep the carburetor attached to the engine. The two screws that hold the carburetor in place (circled in the photo) keep backing off. I was going to use the blue Loctite on the screws. Is there any...

i have a troy bilt riding mower(pony) model 13an77bs011(2017 version). it will not start up. i have replaced the carburetor, fuel filter, new fuel lines ,vacuum lines, it will not start. i don’t think it has a visible fuse that i could find.. any help appreciated joe

I have a Coleman Powermate with one of the last flathead B&S 10hp engines...Has a nonadjustable carb... I want to find a rebuildable earlier carb that has an adjustable idle jet and install on my generator for better performance.. Trying to eliminate a random pop..Have been through all the usual...

We have had a recurring issue with a Scag 48 with a Kawasaki fs548v engine. Twice it has started to run rough and died. Gas was 3 or 4 inches up in the dipstick and fuel was leaking out of the muffler. Took carb apart and cleaned thinking needle was stuck. Did an oil change and it was fine...

Does anyone know a part # for this carb? I have a Troy-Bilt with this engine and it has no carb on it. The Briggs website wasn't much help and neither was the Troy-bilt site. Thanks in advance for any help.

I have a 4 cycle Craftsman trimmer with a Walbro carburetor (751 16046 4 carburetor) the carburetor has 4 ports, one for the primer bulb to bring fuel into the carburetor and one for the fuel to exit back into the fuel tank. What are the other two for? Thank you...

I have a Kohler engine KT725-3031 that I can't get to run. I've replaced the fuel pump and carburetor and it will only run with carburetor cleaner for just a second. Fuel is getting to the carburetor, at least to fuel filter. It has a thermostat assembly 32 755 27-s that attaches to the side...

Looking for carburetor information, Float level and one external adjustment. Does this adjustment adjust the fuel or air. I have it running but runs a little rough at slower speed, runs good at higher speed but seams to be lean running. Pull the choke out it does run better at high speed. Both...

Where can I get a high-altitude main jet for the carburetor? Need 6000 to 8000 FT.

Looking to buy a needle and seat or oem carb. For my Honda harmony riding mower. 11 hp.MZAW 6139134 is stamped on the frame. The first 1 is possibly a 0. Also looking for a new seat. Mine has tears.

Hello, I was wondering if anyone knows the difference between a k301 and a k321 carburetor? I have two tractors with kohler engines (one is a k301 and the other is a k321) and the carbs on both were bad. I replaced the carb on the k301 and when I replaced it, I noticed that it looked...

I'm trying to match my carb from a 124T02-0120-B1 to one of Amazon. I can't get an exact match on components. I need one with a plastic choke shaft that has gears and a plastic throttle shaft. It seems all carbs have one, of the same choke/throttle shafts but not both. The closest I can get to...

The mower has a Honda V560 engine with a carburetor that's not getting fuel to the engine and no start. If you add a little fuel into the carburetor throat it starts on the first pull, but quickly dies. The tank is clean, the fuel new and there is a new inline filter installed. There is fuel in...

I have a b&s model 93502 Type: 0200-01 Code: 82011501 This is on an old snapper that i used for years until the gas tank got a hairline crack and was put under my building for 25+ years. I’m wanting to replace the carburetor & fuel tank with one of these...