briggs & stratton

In the last two weeks I've done many things, but in the meantime the current problem is this definitely getting spark to the spark plug after spraying carburetor cleaner into the intake while turning the key. The only thing that happens is backfire through the carburetor or popping the engine...

I am a self-employed lawn mower repairman, and have been repairing small engine equipment for many years. I am currently working on a Craftsman T130 that is causing me major grief! Following is the issue with the mower, along with parts I have replaced: When I try to start the engine, it tries...

Greetings, Curious, anyone ever see a Briggs Stratton 26HP Intek just stop with nothing and no noise, no locked engine, just no piston movement, but valves work fine on both heads. One piston at top and the other at bottom. How is it possible for both roda to let go at same time with no lock...

Changed carbs adjusted valves still the same thing hunts real bad only runs with choke half on. Changed carb head gasket and lapped the babes still hunts an dies without choke on

ok, i fixed one problem, over rich belching black smoke,,, now, i have an annoying surge...rpm rolls up and down, tried another nikki carb off my craftsman, whcih did not surge... same problem... i have adjusted governor, and checked linkages...could the springs be out of whack? i give up...help?

Greentree is saying this product is 8.40in tall and 7.35in wide. I've never seen one that tall, with the big primer hole. I don't have the model number, because the QR code doesn't work. It's only got a serial number 12 0410 54 72598. 140cc 550 EX(I think)

I have a GSM Wood Chipper fitted with a Briggs & Stratton 18HP OHV V Twin engine. It was running fine & chipping wood fine. It suddenly stopped & will not fire or start. There is no sign of it trying to catch. I have pulled both spark plugs & they are wet with fuel, so it looks as though its not...

Engine was running fairly good but started surging so I replaced the carburetor and crankcase air breather tube and now the engine produces a lot of smoke and will not stay running. Any ideas?

I have a B&G series 650 model number 124T02-0120-B1 on a roto-tiller. The engine starts then stops. I have removed the card and in the process of cleaning it. I noticed a linkage piece not moving when opening and closing the throttle. Any suggestions on why this isn't shifting back when moving...

Got given this mower, originally it ran but was surging and thought a simple carb clean would sort it. Cleaned the carb, now it’s barely running! Replaced fuel, filter, plug etc. getting ready to throw it off a cliff.

Anybody know what the valve clearances are supposed to be on a Briggs & Stratton Model# 08P502-0169F

Where can I get a high-altitude main jet for the carburetor? Need 6000 to 8000 FT.

I have a 356447-0415-G1 horizontal V twin Briggs&Stratton engine on a Walker S18 mower. Sometimes the main pulley driving the mower from the engine does not spin. If I stop the mower and manually spin the main drive a little back/forth, and then restart the engine, it will spin. It appears like...

I'm looking for the torque tightening sequence pattern and torque pattern

Briggs & Stratton 8.50 H.P. Pressure Washer cranks & runs good for 30 minutes then dies, replaced the carb & the coil still have the same problem ?????????????