bearing

Where can I find a couple Snapper/Briggs&Stratton 7015319YP Bearings, or a cross reference bearing. Everywhere I have looked says no longer available. Someone has to have a couple of these.

I know RedMax is now Husqvarna and now makes RedMax backpack blowers. I need 2 crankshaft bearings for EBZ 7500 (p/n 521521301) These bearing are back ordered so would like to know of the bearing numbers stamped into the OEM bearing. I don't have my blower apart to check and see myself right...

Anyone every tried using a real bearing instead of these? I'm not even sure why they call these bearings. Flange Bearing. Model # LGT2654 S# 960450047

Hello, 12 year old Craftsman YTS4000 (917.289283) with about 1100 hours on it. Replaced the front wheel bushings with a sealed bearing kit and apparently "shimmed" the wheels too tight with the large washers (maybe 1/16" to 1/8" lateral movement). After approximately 10 hours of use, the weld...

Hi. Was just finishing the lawn for the year and heard a whining sound that is only present with the blades engaged. Reminds me of bearing noise. Touching the pulleys, none are warm to the touch. Looking at the exploded parts diagram I see no Zerk fittings for lubrication on top of the pulleys...

Do these bearings press fit, into link rod? Probably need a hyd press or maybe just a vice? Or do I stake them in at the edges? Thank you for any advice?

I need to replace the castor bearings on my Classic. Anybody have an idea what the torque is for the bearing preload? Is it like the old car front bearings where you tighten to 10 lbft, loosen then turn it finger tight?

Craftsman 917.289272 (YT4000 ??) MFG in 2010. Upgraded front wheel bushings using bearing kit upgrade and added washer bearing also. But now steering control over front wheels has a problem where both front tires direction will suddenly turn just a bit left or right requiring constant steering...

I'm looking for bearing type/size used to this part 1676278SM Arbor Shaft & Bearing Briggs and Stratton OEM. I need to replace it

8237 Ser 9424117. Rebuilding this engine and ordered a NOS set of needle bearings OMC number 677963 for the connecting rod to crankshaft bearing. Dummy me lost a few needle pins when I disassembled the engine. There were 34 needle pins in the sealed package stuck together with some sort of...

I recently bought a 2015 Hustler Raptor 52 inch deck from a co-worker late last season. This past weekend I removed the front caster wheels to have the tires replaced by a local shop. I greased the bearings and re-installed the tires myself and noticed there is a decent amount of play in both...