Search results

ok i'll be checking t ok i'll be looking into that today thanks ....johnny

thanks ill be doing that tomorrow ..appreciate it johnny

my Husqvarna tractor starts than turns off after 10 minutes ? I got it cheap ( now I know why ) it didn't have an air filter not sure if that has something to do with it ? and I can't see the condition of the gas filter because it's a non see thu filter.. and sometime it turns off as soon as...

what you just described I saw on you tube he had pictures and he had showed that the grass clippings had accumulated preventing ( stop clutch plate ) as you mention from resting clearly on the bottom because it looked as if there was a birds nest under it ..but when I looked at my tractor I...

my tractor at first started to buckle going forward ..every time I pressed the forward petal my body would jerk backwards almost like a wipe Blas every time than all of a sudden it started to move forward.very slowly and couldn't make it up hill. but if you press down on the reverse petal it...

Duh ...ok

yeah thank's buddy and you're right... since i didn't hear from this forum right away i decided to check out you tube and one guy did say what you're saying thanks again johnny

yes I was just going to remove the bucket it's that quick hitch type ..so that means I won't be able to operate the angle of the plow...wow well that sucks..and I was just suppose to leave to meet a guy that I was going to purchase the snowplow from he said that just changing the bucket to the...

hi every body I have a 2017-18 Kubota B2650 with front loader and backhoe and I want to get a 4 way snowplow ..now my question is do I have to add a plow controller to the control shift to operate the plow or can I just attach the plow and the control shift should be able to operate it..?? johnny

hi everyone I have a 2017-18 Kubota B 2650 with a bucket loader and backhoe and I'm searching for a 4 way hydraulic snowplow and my question is do I need to have a third function valve installed on my tractor to operate the plow or do feature of my loader be enough to operate the 4 way plow ...

the guy that's selling it has a b2673 he sent me picture of the plow and tractors operators manual and on it also shows my b2650 as if they were compatible..question ? I was told that I won't need a third function valve to operate the plow but would need one to operate a grapple attachment...

than what would you pay for one in excellent condition

than what would you pay for one that's in excellent condition

I have an almost new Kubota B-2650 and I saw a quick hitch hydraulic snowplow in ( excellent ) condition on Craigslist that'll fit it ..what dose a new one go for .?? the guy is asking $2000...johnny

my deck won't engage the one where it engages with the lever that's on top of the daze ( not the pto button ) and the tracto turns off when brake petal is release..appreicate any help in this mater thanks ..Johnny

hi everybody ..my john deere 318 seams to be losing power when going up hill with a small trailer while hauling firewood..the engine does not seam to bog down but the tractor seams to slow down and hardly make it up a small hill but the engine seams fine?? anyone know what I should check...

that did it..I did a better job of cleaning the carb and it fired right up...thanks buddy can't thank you enough Johnny

sorry for taking so long in responding ..I installed a new brake interlock switch and I still have the same problem ..the only different was I didn't have the mower deck on but I don't see that causing any problems right?? next I'll be doing what you suggested ..thanks again I really appreciate...

ok will do...thanks

hi everyone my leaf blower won't start it has a briggs on it and so far I;ve taken out and clean the carb..I even disconnected the gas hose going into the carb to make sure she was getting gas and it was..I even checked for sparks and the plug dose spark ?? it dose start for a brief moment when...

ok ..I located that switch that get activated by the brake petal and I saw how it works with the brakes ..it has a plunger that seams to have an internal spring which opens once you release the brakes ..it seams to operate good ..the plunger enters and exits the switch just fine not sticking or...

I did what you said and noticed a ( plug connection ) or ( switch ) between the motor and inside the lower dash panel.. also the rod that locks the brakes in place ran through there ..I also noticed the cable that ran down from the deck lever ..what I did was unplug clean & re-plug that switch...

sorry I took so long..im having trouble downloading the picture I took of the tag behind the seat into this site ..so im just going to write it ..and it turns out it is the same one I first put down YTH21K46 - MODEL# 960450021 serial #042410A024077 hope you can help me thanks

ok..thanks so much ..i'll be posting it tomorrow

duh.. I quest you met another brainless one

First thanks for that important information ..and I think I might have put the wrong model down my friend had given me the hood of his tractor sometime ago because mine got damaged and the reason that came to mind is because this tractor does not have a PTO switch ..the deck is activated by a...

hi everyone hoping you can help...i put another deck from the same kind of tractor on my YTH21K46 now it starts but when I release the brakes or engage the mower deck it shut down..,I remember someone mentioning the seat switch before.. maybe bypassing it or something ?? would disconnecting...

ok thank you

Hi everyone I have a cub cadet AG6-2160 garden tractor that does not start and I believe its the gas solenoid on the 16hp v twin engine and I would like to remove and replace it but have no idea where to start ..I'm handy just don't have any idea on how to go about it I have no idea weather or...

hi everyone...my Kubota B7001 diesel tractor needs a new engine so my question is ...can I install a D950 into my B7001 which has a D650 16hp 3 cylinder diesel ?? the D950 has 19hp and is also a 3 cylinder diesel..thanks in advance johnny

hi everyone I just got a vintage john deere 140-H3 with a 14 Hp k321 engine that I have to spray with starter fluid in order to get it to start and once she warms up it starts easy until it cools I installed a new spark plug air & gas filter and I'm waiting for the points and condenser to...

hi everyone...I just got a vintage john deere 140-H3 and would like to know what year it was made and any other information on it I was told you can get that from the serial number can anyone on this forum me with that....serial# 038741-M.....type # T0586 thyanks….johnny

I have a vintage john deere 140-H3 with to much play in the steering wheel hoping someone in this forum can help me with that...appreciate any information johnny

I just picked up a brantly backhoe attachment and would like to install it to my john deere 317 my garage has allot of metal working machinery including a welder but I have no idea where to start if anybody out there has any plans and wouldn't mind sharing or anyone with some know how as to how...

I'm wondering if someone out there has a PTD LINK to a john deere 140 H3 operators manual..??? thanks in advance.....johnny

I have a chance to buy a john deere 140 with a 4 way snow plow 2 rear ag tires with chains and plastic wheel weights it has 3 levers controls on the left and one on the right one foot petal on the left and 2 on the right the owner says the motor and all the hydraulics work fine and it has 1567...

the 2 front tires on my 318 are wearing uneven can anyone help me in knowing how to align them..?? thanks johnny

I have a chance to purchase a 2 diesel engines my Kubota B-7001 3 cylinder 16hp motor is damaged and was wondering if a D-722 or a D -600 will fit it I'm told that the motor in it now is a D-650 appreciate any help ...johnny

my cub AGS 2160 won't start it only start when I use starter fluid and that only for a second or so..I checked the fuel pump and the pump works..?? appreciate any help....johnny

my 317 won't start I wasn't getting anything but when I crossed my Solenoid with a screwdriver it cranked so I bought a new one ( solenoid ) and still nothing..?? it only turns over when I use the screwdriver just like the old one ..?? appreciate any help ...johnny

can a size 18x8,50x8 be used on the rear of a john deere 318 or is it to small..?? johnny

I have a vintage 1967-70 john deere 112 with a I believe is a 8hp Kohler engine I did a compression test and I got a 82 pound reading is that good and will the engine start with that reading ?? I appreciate any help johnny

I have a yth20-42 that I installed a new motor ..the tractor was given to me without one and also without a deck I found allot of problems with the tractor like reconnecting the foot petal and installing a new safety switch on the seat and some other minor problems but the big problem I'm having...

I have a yth 2042 that doesn't move forward or reverse when I activate the lever I'm yet to look at the connections to the lever and was hoping someone out there can tell me what to look out for and how to tackle it'''thanks in advance johnny

I have a Husqvarna YTH 20-42 that I have to depress the petal in order to start it but once I ease off the petal it starts to shut off and with the mower disengaged and me sitting on it it still starts to shut down...i'll appreciate any help thanks.. Johnny

what does it take to make the tires on my John Deere 317 fit my 318 ?? do I have to change the wheel bearing ?? Johnny

the white engine I installed on my Husqvarna has 2 mechanism on the front where cables connect so I had to run a separate choke cable just to operate the choke and was able to connect the gas ( speed of engine ) which is control by the lever on the left side of the steering wheel ..now the...

hi I have a Husqvarna yth 20-42 that won't start I've used clean gas I cleaned the plugs I've changed the fuel pump because the one it had wasn't working I replaced the carburetor.. it cranks good and only start for a second or two when I use starter fluid..it does not have a deck hooked up to...

Hi I was wondering if a 3 cylinder diesel 16hp engine - model # D-600 fit my Kubota B7001 Kubota tractor which also has a (blown ) 3 cylinder 16hp diesel engine are they compatible ?? johnny

hi ..I have a Kubota B7001 with a 16hp diesel 762cc 3 cylinder engine that needs replacing and I just saw one on e/bay but its a D905 3 cylinder engine that came of a Toro lawn mower does anyone know if this engine will fit my tractor..thank you in advance...johnny