Search results

Results 1 to 8 of 8
  1. C

    Timecutter 60" Electrical Gremlins, Bad brake lock module?

    Replaced the Brake Module.. All is well again.. :)
  2. C

    Timecutter 60" Electrical Gremlins, Bad brake lock module?

    I bought this in mid 2017 and use it just about weekly since here in Florida.. I maintain 5 acres.. Its been solid.. Luckily I do my own maintenance so I save a ton.. Had to replace the Battery and spindle bearings (not the whole hub) The factory ones were bone dry and started wining at year 3...
  3. C

    Timecutter 60" Electrical Gremlins, Bad brake lock module?

    I found a service manual with schematics and will start checking all the switches and such.. My gut tells me the Brake Module crapped the bed.. But I need to ensure all else is good before I pull the trigger on a new on.
  4. C

    Timecutter 60" Electrical Gremlins, Bad brake lock module?

    So my Mower decided to not release the brake after mowing the lawn and blowing it off before putting it away. Started fine, I tried to move it and the brake would not release. I tried to manually unlock it and as soon as I started it and tried to move the brake engaged again. I checked the two...
  5. C

    Testing the vacuum Pulse Fuel pump

    I couldnt stand the suspense, I cracked it open and sure enough, there was a small hole in the diphragm.. I went to a local Mower shop and got another.. Running great again.. By the way, that pinhole causes raw fuel to be sucked straight into the manifold of the cylinder. In my case it was a...
  6. C

    Testing the vacuum Pulse Fuel pump

    My V-Twin started running really rich and and smoking. I started to test the fuel pump since there was fuel in the Vacuum Pulse line. I pulled unit and cleaned it up. If I blow from the fuel inlet side I can feel air flow all the way through. If I blow from the outlet side to the inlet side, it...
  7. C

    Toro Timecutter MX6050 60" Leaving un mowed strip under the exit chute

    I recently replaced my blades with a set of high lift Mulching Gator blades. While these things are amazing they leave a about an 8" strip of not completely mowed grass by the exit chute. This forces me to overlap my cuts by a big margin. I am most certain its because the additional force of the...
  8. C

    Toro Timecutter MX6050 60" Upgrade to Gator G6 Blades Successful but have a question

    Toro Timecutter MX6050 60" Upgrade to Gator G6 Blades Successful but have a question HI All, new to the Forum.. Recently got this 60" Mower for our 5 acres. I have about 10hrs on it and the blades are already dull and warped downward from running through standing water. So I pulled the crappy...
Top