Search results

Hi all, trying to do a rebuild on this old engine, but for the life of me, cannot budge the flywheel. Using a two bolt wheel puller, soaking in penetrating fluid, still will not let go. Tried manual spanner on the puller, and even tries air rattle gun, still no joy. If anyone could help with a...

Hi all, have this Ozito chainsaw, which is probably sold under many different brand names, and I have seen many saws with this same carby, so someone may be able to assist. I have four brand new carbs that I have tried, all the same result. I cannot get the primer bulb to pull fuel through the...

Hi all, Tecumseh parts are difficult to obtain in Australia, so if anyone would know where I could order from it would be great. Can get gasket set etc from Jacks Small Engines, but he doesn't have piston rings listed as per mine which is marked on the piston top as 010. I take it this is 10...

Hi all, this unit has only been used twice since new. A mate has dropped it over for me to try and crack it. Problem being it won't start, or even give a cough or fire at all. After checking the usual things with a small 4 stroke, such as does it have spark/ fuel / compression etc? which it has...

Hi all, this engine runs without load, but noticed when loaded down, the governor arm on the crankcase is not pulling back with the engine revs. I fear it is something internal that has broken, or fell off. Due to parts for these being hard to find, don't really want to have to strip it down to...

Hi all, could someone please confirm the HP rating of this engine. I read some sites that state 9HP, then others 11HP. If it is 11HP, would it possibly be suitable to drive a 42 inch cut deck on a Westwood Ride on? Grass is not overgrown and fairly easy to cut. Many thanks.

Hi all, would anyone know if the valve rocker arms from the GX engines are all the same? I have a broken one from my GXV340, and there appear to plenty available for the 160 and 200 engine, but not the 340. They look identical, but not too sure if it would be ok to use in the 340. Many thanks.

Hi all, new here, have some mechanical exp, but qualifications are in the auto electrical areas. Have the above engine on a westwood 42'' cut machine, and it needs some serious overhauling. It is fairly fumy from the engine breather, and the starter has packed it in. It does run, but lacks...