Search results

Hi, Well, got this Saw running and tuned. Bought a Chinese Carb, which I have actually had good luck with on different machines. Could not get this one to work correctly, so looked for a used OEM and found one. Put a rebuild kit in, and just to be sure, new fuel line and filter. Saw...

Hi, Well, took the Blower to my Buddy that owns his own Lawn Mower Shop. He told me the problem was a scored Cylinder/Piston which I knew. However I still got 125PSI on the Compression Test and called it good? Nope does not work that way it seems! Just thought I would follow up with...

Hi, Title says it all. Looking for opinions on the best model Snapper walk behind Mower???

Hi, Thanks, I was told at least 15 inches on Vacuum and 7 PSI on Pressure??? Admittedly your theory sounds very good!!! Thanks again! I'm now going to look for a Carb problem, tested fuel line and it's good!

Hi, Was not able to get this Saw tuned up so wanted to check for pressure/vacuum. Pressure held great but vacuum. I would pump down to 15 then guage would rise to 10 and hold? Wondering if this normal or what others have found doing vacuum tests???

Hi, Put everything back together and still no start? I would like to try another flywheel just for kicks but hate doing that!

Hi, No, but just did! Here is a pic, marked location of magnets on flywheel then set to TDC... About an inch from edge of magnet to edge of nearest coil leg. This flywheel has an internal (built in) key and looks fine? Thoughts???

Hi, Well... Got my pressure tester in and this thing passes pressure and vacuum tests with flying colors? (Holds 7 PSI, steady as a rock!) I'm going to put it back together and try it again. If it still does not work, I have a Buddy that owns a Lawn Mower Shop and will see what he can...

Hi, Yes, thanks, I pulled the screen, everything is clear.

Hi, Thanks, yes I mentioned that. I will see what happens when I get the pressure tester tomorrow, but if good... I'm out of ideas, do not see anything, I'm missing?

Hi, Well from what I can find that is the OEM Flywheel???

Hi, Info off of Flywheel... Phelon 22370-03 Made in USA?

Hi, Thanks, info is... Echo ES-2100 Type 1-E Ser. # 529028

Hi, Did a Vacuum Test, do not have my Pressure Tester till tomorrow, but... Vacuum is steady as a rock, I mean no leak down??? Cylinder Screws are tight of course... Will see tomorrow what the Pressure Test shows but if good like the Vacuum, and I am confused!!! If I am missing...

Hi, Yes, I was going to pressure test. It will not even pop with fuel in the cylinder through plug hole or carb? Pulled a known good plug also to test? Does not make any sense, but... I will check cylinder bolts for tight, looked for and saw no oil or leakage around crank seal when I...

Hi, Well new Coil installed, still won't start! I have spark, compression, and fuel, timing good... The only else I can think of is a seal leak. Will have to tear it down and check for that... Only thing I can think of at the moment!

Hi, Thanks, I think the Coil is Toast but does spark when tested? I will see what the new coil does?

Hi, Gifted this Blower, really dirty, cleaned it bought a new Carb... Replaced Fuel lines,Sparkplug, and tried to crank and nothing... Checked Muffler, checked spark, checked compression (120 PSI) pulled Flywheel, key is good, Coil was rusted... Tested Coil with Vom and numbers run up...

Hi, I guess it would have to be a 4 screw Vertical like this. https://www.brandnewengines.com/products/ar-pressure-washer-vertical-pump-2600psi-2-5gpm-7-8-shaft-4-bolt-sae-mount-srmw25g26d-f7

Hi, Saw this...

Hi, Yea, out of stock. Will any of these Horz. 4 screw 7/8" Shaft Pumps work? Any good cheap pumps out there? ($100) Thanks again!

Hi, Thanks ST, seems EReplacement is the only place I can find this and they want $70 shipped! Is there an affordable direct replacement pump you would recommend ? I have no idea, why someone would make a pump and not label it???

Hi, Was gifted this older Pressure Washer and looking to rebuild the Pump. No name on Pump, it is a 4 Screw model and looks like a Kurcher Brand but no label or markings. The Pump for this model # at EReplacement parts is not the same pump??? They want $350 for a new pump. Will try to...

Hi, I found my problem and FIXED, but thanks, Jim Jackson is a good Man and a great help with these Mowers!!!

Hi, Well, after all of this on My Sister's Snapper... I was using my Snapper, cut my yard, no problem. Then later, went to put it away, and no start??? Went straight for the Safety Switch Grounds and found that the Coil was bad! Put in an extra used Coil and she started right up and...

Hi, Ok, I was mistaken in this. The Liner is for the Clutch as mentioned and not for the Brake. Thanks!

Hi, Thanks, that is also, where the Brake Pad contacts, to stop the Mower.

Hi, The Blu/Green, Liner, inside the Clutch/Brake Disc is gone, and going to replace it, but... Is it glued in, and if so, what is the best Glue???

Hi, I was wondering as I am familiar with the Bearings and Bushings used on a Snapper RER... And that was not what I was seeing. People that come to these Forums looking for help seem to want to give the least amount of info for some reason??? Just sayin, more better info in, better...

Hi, So what is it? Where does it go? Just a number is not all you need. More info???

Hi, This is an Axle bearing? Steel or Nylon? Running into different things with this number?

https://www.partstree.com/parts/snapper-7015319yp/

https://www.snapper.parts/Axle-Bearings_c_87-2.html

Hi, No, I want to thank you! I did have an electric problem and by going over everything and checking connections fixed it. THEN, I had a Module problem, that the Yoke Tab fixed. This is a refurbed Snapper for my Sister so I wanted all the switches working. Thanks again!

Hi, If you can't read a Schematic and know how to use a VOM Meter... You would be best to just take it to a Shop. The problem could be a LOT of things and you need to eliminate things to find the problem. Just sayin!

Hi, FIXED! I have a friend that owns a Lawn Mower Shop, but... Try not to bother him except for emergencies... Well, deemed this one as I did everything I knew to do, tracing, testing, ect. He made me aware of the Tab on the Yoke that pushes up the plunger on the brake pedal switch...

Hi, I have an old module, but would a continuity test tell anything between the four connects?

Hi, Is that suppose to tell me I have a bad Module???

Hi, Then why was you wondering if I got spark with the Module out of the picture??????

Hi, Ok, went through everything again and resecured some connectors and now have spark with the Interlock Module out. Star Tech, any thoughts on that? This Module is brand new.

Hi, Went over everything again. Found the Connector Shorting Strip,on Seat Switch Connector spring loaded was stuck/sticky, so lubed and freed that up working good now. Went back over the yellow wire, back probed with another wire, no spark. Noticed this time yellow wire chaffed in a...

https://www.powertoolreplacementparts.com/briggs-stratton-7015319yp-bearing-axle/

https://sleequipment.com/catalog/product/view/id/4283878/s/briggs-7015319YP-2024/

Hi, The only thing I can do is replace the yellow wire, but... Maybe just solder the ends on another wire stuff it in the connector (back probe) to make contact on both ends and see if that works? If it does then a bad wire no matter how good it looks? Reaching, but hard to figure what...

Hi, Well, traced the Yellow Wire all the way back from Seat Switch to the Brake Switch, no breaks cuts, no loose connectors everything look fine. Retested Seat Switch, all good. Thanks again!

Hi, Well, I've got a problem, that's for sure. Thanks for the help!!! I'm trying to figure how all this works and admittedly getting lost in the sauce! Would you be up to explaining your method or reasons in your troubleshooting??? Is a grounded yellow wire the only thing it can be...

Hi, Ok I was wrong went over the Mower again and the Plug to the Brake safety switch was disconnected. Plugged that back in no Interlock Module and no spark at the Coil. Sorry! Tested Brake safety switch and test good. Did a Vom test on the yellow wire and got "0" , not "OL"...

Hi, Thank you very much! YES, I have spark with Module pulled. This by the way is a brand new Module???

Hi, I have an older M281019BE Snapper RER. Trying to get it running again after buying it for cheap. Figure to go through it and fix what was needed. Had to replace some shot wiring and stayed with the old Harness and went by the Wiring Schematic, but... Having problems with 2 of the...