Search results

Results 1 to 8 of 8
  1. M

    old Tecumseh tc II tiller model number 161lc-n

    does anyone have a diagram that shows how to connect the carb to the engine?
  2. M

    old tecumseh tc ii tiller model 161lc-n

    does anyone have a diagraph that show connecting the carb to the engine?
  3. M

    pully tension spring

    I seem to go from one problem to another. Some day I will cut some grass. I have a 2006 yard machine 42 inch 17.5 hp I finally got the engine running smoothly, thanks to you guys, now the blades won't engage. The belt(correct new belt) is loose when the pto is engaged. I carefully check to...
  4. M

    How to remove bowl nikki carb

    I have a 2007 yard machine with a 17.5 hp B&S engine. Model # is 31c707. I have had several problems with this mower that I worked thru given advise from the forum. I am down to; starts but runs really rough and goes thru gas like crazy. I was advised to test the fuel solenoid and clean the...
  5. M

    yard machine 17.5 b&s won't start

    The engine will turn about a 1/4 turn then stop. I get a little fuel back thru the carb. The positive from the battery to the solenoid gets a little warm after 3 or 4 tries and I am get a little smoke. Appreciate your help.
  6. M

    spring replacement

    I have a yard machine 42 inch. I had a spring break and come completely off the mower can anyone tell me how to install the new spring? thanks
  7. M

    deck belt rubbing

    I have a mtd yard machine 42 inch. The deck belt is rubbing. when the pto is engaged the idler pulley is too far back, is there a spring or something to keep the pulley from moving too far?
  8. M

    brute won't start

    I have a self propelled Brute. The mower has sat for more than a year with fuel in the tank. I replaced the spark plug, air filter, drained and re-fueled, added a fuel conditioner. It will not even attempt to turn over unless you spray starter into the carb. as long as you continue to spray...
Top