Search results

So i came to turn the mower on this morning and all i heard was a click from solenoid so i do a couple things and end up changing the solenoid with a working one. Still does clicking and doesn’t start. Battery has good charge and is fairly new

I installed a new carb on this mower and it runs great, but just on full throttle. if you try to put it on low idle it misfires and sputters and eventually dies. Any help? 13AC26JD058

I got this craftsman mower with a chinese engine on it (420 CC) and changed the carb on it, now when i engage blades, it shuts off on me. I took the belt off of the engine spindle and turned the blades on and the engine didn’t shut off so it’s not a safety issue. i spun the blades with my hands...

Rim was really seized up with the axle so i had to hammer it some. Then it came out with everything and how does it go back in

The engine starts up and everything but it sounds like it has a sputter? check the video i uploaded for exact sound. maybe the valves but i will check tomorrow. https://veed.io/view/16729d9e-3a9b-4d19-bfd6-dd537ecba968

The engine starts up and everything but it sounds like it has a sputter? check the video i uploaded for exact sound. maybe the valves but i will check tomorrow. https://veed.io/view/16729d9e-3a9b-4d19-bfd6-dd537ecba968

The engine starts up and everything but it sounds like it has a sputter? check the video i uploaded for exact sound. maybe the valves but i will check tomorrow. https://veed.io/view/16729d9e-3a9b-4d19-bfd6-dd537ecba968

so i finished cutting the grass with it, tried to start it back up, and nothing. not even the time meter came back on again. changed the battery even though it was good already. solenoid. checked the fuse. still nothing. i don’t really know what’s wrong and what happened. Any ideas would help thanks

I thought it may have been something with the deck so i took it off but even with the deck off, the engine still shuts off when pto button is on. So it is an electric problem but i don’t know how to fix it right now

i got a pony riding mower (2008) that runs great but only issue is that it is pretty slow. it seems to be in the same speed even if you use the speed selector from 1 to 7. I changed the main drive belt but it wasn’t the problem. Any ideas? model: 13AN77KG011

i have a 2008 zero turn with 400 hours on it. Runs great but the left transmission seems to be having a hard time to turn. It whines and is obviously weaker currently than the right transmission. Any ideas?

The engine runs good. Only problem is that the engine gets stuck for like a second when you spin the starter over with key. Then it will turn over normally and start. What could be the problem?

It has a single cylinder 19 horsepower briggs and stratton. 2018 year model. Will post model number later. So when you turn the key, it gets stuck like it has too much compression. Sometimes the starter will make it through and allow it to start. But most of the time the starter just gets...

I have a v twin briggs 24 hp runs good but it sounds like it over revs when throttle cable is put all the way up. I’ve tried to adjust the cable but if i try to lower the maximum speed of the engine. The choke will no longer work properly. Any help is appreciated. Model: 44R677

So i have a weird problem with this mower it’s a 2018 bronco with a briggs 19.5 HP. I tried to start it and everything was normal except that the starter kept on moving even after turning the key switch off. So i had to quickly disconnect the battery to make it stop. I’m thinking it’s the...

I have a simplicity courier z turn with a 24 hp v twin briggs and it has a problem we’re it won’t start after using for about 40 min to an hour. I am thinking that it is the carb fuel solenoid going out or maybe the ignition coils but i don’t think both of the coils would go out at same time...

Mower is in good condition. It starts right up, but the issue now is that the engine runs at about 2500 rpm’s in low throttle. It starts to get higher when it warms up but when it’s cold it idles normally. I assume it’s an easy problem but i could use help.

I recently changed the belt on a troy bilt horse riding mower because the old one kept jumping off. Now that i put the new one on, it doesn’t jump off but now the mower is very slow and makes a squeaking noise like the belt is rubbing against something. I notice that the belt gets pretty hot...

Model: 13WX79KT011 Video of belt jumping off https://streamable.com/aetmje The drive belt comes off when you press the brake. There is a large space between the light brown pulley and the bolt that is supposed to keep it from coming off. I could use a little help thanks

I have a craftsman with a Briggs 19 hp and recently switched out the carb, yes it’s a new Chinese carb. But when I turn it on it makes a small popping/misfire here and there when it runs. There is also an adjustment screw on the side of the carb new carb (which I believe it controls how much...

I’ve had a few single cylinder Kohler courages and they seem to be louder than the briggs intek single cylinder I’ve had. Is it just me or are they actually louder? Just curious.

Anyone know the red paint that the Craftsman 91720381 uses? I need it to paint the deck. I was looking for paint online but I cant find much, maybe there is a similar paint color in lowes or home depot? Any help would be nice.

I got a basically free Troy Bilt super Bronco with 50 inch deck and it starts but needs throttle cable replaced, it has a crappy Chinese mtd engine. Apart from that, it only runs on one cylinder, I noticed it since it would run very poorly with blades engaged and bogged down a lot. Both sides...

I’ve had a couple of riding mowers, which all have been MTD mowers. (Troy Bilt, Cub Cadet etc) It wasn’t all of them but some of them had to have the blades engaged at highest throttle or else the engine would die by itself. When it first happened to me it was with a 2009 Troy Bilt Bronco with...

31R977-0027-G1 I have a 17.5 HP b&s that surges badly and occiasonally makes popping noises. I switched out the carb with a new one to see if it was that but it also surges (it is chinese) and pops. The old carb also surges and pops. It surges a lot more when the blades arent off, when I turn...

I have an echo back pack blower that smokes a lot. I cleaned the carb and it starts and sounds fairly nice, but it smokes a lot and more when I rev it up. Don’t know what the problem is and I’m 99% sure the gas and oil is mixed well because I put it new. Any ideas?

I have a toro which works perfectly fine but it makes a sort of grinding noise the more i put the rear wheels up. There is no sound coming when I am in the middle of the wheel adjustment but when it goes to the two highest wheel levels it starts to do the noise. It is rear wheel drive and the...

I have an echo gt-225 and it bogs down when I try to trim grass with it, it does not matter if the grass is thick or not. It idles fairly good and the fuel is pretty good. It does have a Chinese Carburator in it but it used to work good until like a week ago and the problem started. Don’t know...

I have a b&s 150 CC engine. It has no compression so I checked the valves and every thing seemed alright. I couldnt figure out what it was so I took the head off and saw that the piston would not move. I pushed the piston in with my finger and turned the engine over and it got pushed out a...

I have a cub cadet ltx1040 and ran good and all but when I press the gas pedal it would move for about half a second and then come to a stop. Then I would press it again then the same thing would happen over and over, after that it started moving normal. Anyone have any ideas?

It has an automatic transmission so forward, nuetral and reverse and controlled by a lever. It will sometimes work good and go into gear normally but other times it will stay stuck in the middle (example, in between forward and nuetral) Anybody know what could be causing it?

Extremely rare but if you have one please let me know!

To replace the crank seal on a B&S Intek 500 cc do I need to take off the engine or can I do it just under the front of the mower. I haven’t had the time to look exactly how to do it.

I have a snapper 1438h and I have discovered that it is a very rare mower. Unfortunately the mower would not move when I made it start and took the transmission out and saw many broken pieces. I would like to have this mower and not just scrap it since it is rare so does anyone know where there...

I recently got a D105 that supposedly has a problem. The problem that was said in the post was that the mower would shut off by itself after using for a while and then needs choke to start back up. I havent had time to use it and see what would actually happen but I would like to have some ideas...

I got a ltx 1040 for free. Made it start and all but when I turn it off it makes a pretty loud knocking noise. It’s not the deck or anything because I took it off to see if that was the noise. Does anyone else have this problem or know how to fix it? Thanks

I have a Honda mower which works nice except it surges a lot when the blades are not on. When I turn the blades on the surging stops which is clear since the governor arm stops moving from left to right. Any idea of what’s going on? I cleaned the carb pretty thoroughly.

I bought a Troy Bilt leaf blower, I did all the usual things to fix a small engine like air filter and I also bought a brand new carb. However, it smokes a lot but I do not know what the problem might be. Any suggestions?

I recently bought a mower to fix, It is the Troy Bilt Bronco 2009. It has a 18 HP 597 CC Engine. I bought a new Carburator, new coil, new gas lines, new air filter, changed the oil, changed the spark plug. It runs perfect for about 30 seconds but then starts surging and that’s all it does until...