Search results

Official message from the supplier is that the module will NOT work on Tecumseh motors such as a HH60. That old of a unit needs the point and condenser to fire the plug and according to them there is not anything available to convert them over. So there you go question answered.

I'm waiting to hear back from the supplier and see what they say about it .... that should be interesting to see what they come up with ... i'll be letting you know ... should be fun

I'm going to get in touch with the supplier and see if they can give me any advice. If i get the key to making it work ,ill be posting it here so maybe it can answer anybody else who run into the same problem. Thanks again

StarTech .. I did try that and got intermittent spark very intermittent but nothing steady enough to run.Scrubcadet .. Ive thought about doing exactly what you said cause this conversion for whatever the reason just is not working out like i hoped it would . Thanks to you both for sending your...

Also a remote starter button works better than a screwdriver when trying to jump the solenoid.

For safety reasons , always disconnect your black ground negative cable from your battery until you are ready to start actively testing your circuit. That will eliminate any accidental sparks .

Has anyone converted a HH60 to electronic ignition ? Changed the coil and sparkplug , installed the nova unit and still no spark. Magnets are good and in place , no kill wire hooked up and still nothing . Could it be a bad new coil or what am I missing. Thanks for your help

Thank you for the welcome Catherine i'm happy to be here

Richie F.... Thank you for that link ! I think its just what I need to chase down the gremlin thats runnin around in this unit Thanks again!

Trying to get a 3185 HDS Cub Cadets EVac PTO system to work . I think vacumn is ok but can't find a good wire schematic for it and the dealers i checked with havent had any experience with them and i was told no service bulletins are available for it. I would really appreciate any help anyone...

thank you Mower King i appreciate it

Thanks for the howdy . Yeah hides been scraped off of mine also ,had 18 years as a large ag tractor mechanic for a Deere dealership in N. IL. Found out that lawnmowers were ALOT easier and more fun to work on. My repair shop is the Rusty Knuckles Garage but that's just because I'm 66 and my...

Just want to say HI and thankyou for letting me be a part of this. I ve been working on lawnmowers for around 28 years and ive found out that if you ask people ,when you come across something you can't figure out you most likely wil