Search results

Results 1 to 8 of 8
  1. C

    Old 5HP Rototiller fouling plugs.

    I recently bought an old Southern States brand rototiller that has a 5HP B&S that is hard to start and fouls plugs. Model is 130202, Type 1915 01, Code 84120606. Looking inside the spark plug hole I can see quite a buildup of carbon. Compression is only 60 psi ( I work on a lot of old small...
  2. C

    Belt for Wheelhorse 211-4 Side Discharge Mower Deck

    Hi All, the Mower Belt on my 37inch Side Discharge (2 spindles/blades) is cracked and show signs of failing very soon. Mower was giftet to our son after sitting around 10 years in good dry storage barn. I have the original Operating and Maintenance Instructions for the Mower Deck (as well as the...
  3. C

    Replacing Drive Control Cable 946-04440.

    On Troy-Bilt 21inch 7.75 hp Professional model 12AI869F011 what is the easy way to replace Drive Control Cable 946-04440? I am thinking I can remove the Blade and then Plastic Baffle(s) above the Blade to gain necessary access. Thanks for any advice...
  4. C

    B&S 625EX fouling plugs, guzzling fuel.

    This engine on my TroyBilt TB200 mower is suddenly fouling plugs and doubling fuel consumption. Was previously mowing whole lawn in 1/2 tank fuel. Now it uses more than 1 tank to complete the job. RPM'S cycle up and down more now vs. before. Oil level remains fine, possibly slight overfill but...
  5. C

    No Spark No Compression but Recoil Starter turns Blade 4hp B&S.

    On a Murray 22inch Mower 4hp Briggs & Stratton Sprint Model 10J902 Type 0293 Code 05042651 will not start. Using an adjustable gap Spark Tester I see no Spark. Using Compression Tester I see zero compression. When I pull the Recoil Starter Rope the blade DOES rotate correctly (indicating that...
  6. C

    Air Cleaner Screw 691417 for Model 10J902 Type 0293.

    What are the dimensions on above screw? Is it 8-32 threads by 4inches (or 4.5 inches) long? Any help would be appreciated (so I don't have to order/expedite just this one part vs. getting at local hardware store).
  7. C

    Correct p/n for 125BVX Cylinder/Piston/Rings kit.

    I am having trouble confirming what the correct p/n is for the Cylinder/Piston/Rings kit for a 125BVX Blower with Mfg Date 2010. Can anybody please tell me the correct p/n for this Kit? Also what website/source are you using to determine the correct p/n? I also need Crankshaft Seals which I...
  8. C

    Plastic Welding and Testing Poulan HDPE Fuel Tank

    I am nearing my wits end trying to plastic weld a leaking black HDPE fuel tank on my Poulan 21inch self propelled model PR65Y21MA. This is a clamshell-type tank whereby the top 1/3 of the tank is apparently ultrasonic welded (or solvent cemented?) at the factory to the bottom 2/3 of tank. I got...

Footer Links 1

Top