Search results

Did a little more searching, and I really did NOT dig deep, but I think you would probably have to change the flywheel -$133.xx add the fan -$16.90, the cup - $8.70 the recoil assy., - $45.24 and the new housing - $ ??.?? and maybe a few other items, this is the ONLY dealer I checked so you...

Assuming your battery is good ( 12 + volts) and the rest of the starting components are good, ( starter solenoid, keyswitch, battery cables, wiring harness, safety switches ) then I would FIRST ... adjust the valves (see manual in link) .. Pg.21...

NOW, .. we need your engine's numbers, see engine info in example..... .....click to enlarge

The first 3 digits of a Sears / Craftsman product MODEL NUMBER, is the Source-Code Identifier ( Original Co. that actually made the product for them,) take note,.. some of the companies have changed hands, changed names, or maybe no longer exist...

Lots of USED & new parts too! http://tractorsalesandparts.com/ http://usedjdmowerparts.com/

In case you have a cracked hood and want to REPAIR it instead of replacing it .$$$$$ This might be a worthwhile investment of a few minutes time. ..:thumbsup: https://www.polyvance.com/John-Deere-Lawn-Tractor-Hood-Repair/ There are cheaper tools, equipment that can be used, see post (GAS...

Here's some info. on repairs to polyethylene ( and other types) of tanks, Best to use the SAME TYPE of plastic you are fixing, get old mower gas tanks from a mower shop/ junkyard/ salvage place to cut up for filler material or buy new, https://www.youtube.com/watch?v=u829qLroshw...

Welcome to the LMF site, I'm sure you'll enjoy the time you spend here . Should you ever require assistance, please furnish some necessary information about your machine, (see example)

IF you really REALLY want it ! better have DEEP pockets ! ( I can't believe some $#@&%$##$@ would charge this much ) I feel for ya fella . ...

Welcome to LMF, hope to see you here often !

C'mon purvis, you know damned well what it is, ....fess-up, tell him !! It's those pixies wreaking havoc !

Seems Walbo has an improved ethanol-gas resistant diaphragm for some of their carburetors, click on the link near the last part of the article, ........ http://www.walbro.com/walbro-spiral-diaphragm-selection-tool-innovation-60-years-making/

Seems Walbo has an improved ethanol-gas resistant diaphragm for some of their carburetors, click on the link near the last part of the article, ........ http://www.walbro.com/walbro-spiral-diaphragm-selection-tool-innovation-60-years-making/ ( tried to delete this 1st post..NO can do ! )

As Bert said,.. we need more info on your machine, ( engine in particular) and a bit more of what IS happening , is the starter actually spinning the motor over or just clicking or thunking, is the battery fully charged, has it been sitting for awhile, see example for info we need meantime...

Welcome aboard Tony, We enjoy getting new members,and congrats on the new machine.

You need to supply your ENGINE information, (see in the example) Just out of curiosity, are you trying to obtain MORE HP ?? and do you have a one barrel, or, a two barrel carb on your engine now ??

Welcome to LMF JD, sounds like you have a full agenda, hope you have a heated workshop, ( LOL )

This is about the only thing I found about a cast iron sleeve in these models ( so far ) one ad says it, the other does not but I would ASSUME it does since, it has a few other "enhancements" ........ ... I have an Intek I/C 21 HP (2003) and it has an iron sleeve ( model 4045A7 )

Diggin through my General Transmission files for another member, Awhile back some had an axle seal leaking and GT put out an advisory on how to repair it ....... ... ... http://services.generaltransmissions.com/en/service-manual.html MORE TO FOLLOW ... ( keep checking )

ANOTHER kick in the gonads !! was just checkin P/Ns to order some engine parts for perceived up-coming maintenance, and some parts for the 44R engine, just discovered my 2 Barrel NIKKI carb on my 2003 B-S 21 HP no longer displays, it now shows the 1 Barrel carb, similar/same as the carb on...

Motoman : here's a lil info. should you decide to go manual choke. ...... ...... https://www.ebay.com/i/272327909964?chn=ps .......... you can alter these cables to fit as necessary, most likely have to remove carb to install choke-link, ( dont forget the gaskets !! )

INFORMATIONAL : this is a top view of my carburetor, idle speed screw is at 9:00 o clock position, area in red, is where to check for THROTTLE linkage arm rubbing on INTAKE manifold

Little by little, THIS INFO. pertains to the model 44 N models ..NOT the 44 R !! this member posted this awhile back, and has NOT been on the site recently, hope he doesn't mind !

AHHHhh yes motoman, great idea, BUT ! ( UT-OH, the magic word ) it will take much effort and time on the ADMIN to make the necessary changes, for MONTHS, I urged ADMIN to create a whole new forum just devoted to TRANSAXLES & TRANSMISSIONS, because there were so many folks posting their trans...

Welcome to LMF Perry, happy to have another new member, glad, that you're pleased with your new machine . as for your BIL, well..... next time you visit at his place, if you can get a few minutes ALONE with his mower, pull the "spark-plug(s)" and rap the center eloctrode down to ground out...

WELL, I've had my head up my arse, AGAIN, looking through the parts manual of the ( 44 R 877 ) & ( 44 N 877 ) engines I OVER-LOOKED the difference in carburetors and intake manifolds, what a DIFFERENCE !! it appears the 44 R uses a "2 barrel" carb & intake manifold, whereas the 44 N uses a BIG...

Took the shroud off today, MAN do I have some CLEANING to do !!! anyway, I wanted to see where my voltage regulator wires were hiding, (found them) and most of all, where the choke return spring might connect to AND ... to check out the VANE !! Gotta remove the flywheel screen, (4) screws then...

More info, here's where to get YOUR parts manual motoman.. https://www.briggsandstratton.com/na/en_us/support/manuals/results.multiStepManualSearch.html?searchrequested=44n877-0001-g1 Here's info on the Briggs EFI engines you want Briggs to release ! ... other info. ...... you can find (...

WELCOME !! No matter what WE decide, YOU !! have to live with it !! ..:laughing:..:laughing::laughing:..:laughing: Seriously, you'll probably get some helpful opinions here !

Forgot to mention, I ran across a few engine descriptions which I'm still trying to figure out, besides this Ready-Start model, there's ALSO a Choke a Matic, and a Manual Compression Release version equipped engines ..???? I think the Information folks at Briggs & Stratton have their head's up...

Well Slick, you're shy some information here ! Are you planning to replace the "frame" and re-install ALL your components onto to the "new" frame, maybe you're thinking of welding a new section of frame on, please clarify, also, the IMPORTANT info is lacking, see example and provide as much info...

A bit more info : Here's the News Letter Release from B&S, you will have to enlarge it (sorry).....see paragraph 4 ... .......click to open, click again to enlarge ... ...P/Ns 217A,291,1386,1474 ... ...P/Ns 212,227,306,306A,573,865 ... ...P/Ns 209,211,216,216A,222,501A These are from...

Here's the News Letter Release from Briggs, you will have to ENLARGE it (sorry) see paragraph 4 ... ... click to open, click AGAIN to enlarge....... .....P/Ns -217A,291,1386,1474 .....P/Ns -212,227,306,306A,573,865 .....P/Ns - 209,211,216,216A,222,501A These are from the B&S...

Posting pics related to Briggs & Stratton Models ( 44R877-0001 -G1 ) & ( 44N877-0001-G1 ) engines for the interests of anybody that is interested in theses models of engines. Please feel free to post any pics or further info. related to these models. some of these pics I found on THIS site (...

Motoman, Thanks for YOUR patience, and kindness to help, I've been doing some heavy searching for info on these (44-SERIES engines) I didn't even know the 44N ( such as yours) model was included in these thermostat model engines. the thing I've found is, these models are "unique" unto themselves...

These are screws used in MURRAY mower (front-engine) models on the frame rails to mount various components, usually ABOUT $4.00 - EACH, got a box of 50 here for $11.00 + S/H ($6.00) =$17.00 , EXACT replacement !! Could also be used on other brands of mowers ...

Many items here can be used for mowers http://www.clipsandfasteners.com/Ball_Joint_Assemblies_s/50.htm

Many times you can find a "FORD" start solenoid (relay) cheap, most have 4 TERMINALS, but you can use it as a 3 post if you wire it correctly .... ...

http://www.mymowerparts.com/

http://www.sjmparts.com/index.php?route=/reference/guides

Lots of GRAVELY INFO here http://www.brentchalmers.com/Manuals/

Don't forget to click on the pages, at the bottom of the first page...... https://www.google.com/search?q=largest+lawn+mower+salvage+yards&ei=Q9xQWqG6LdLrmQHY2omIDQ&start=20&sa=N&biw=1074&bih=697

Clicking on various items, supplies further info http://www.tractordata.com/lawn-tractors/index.html

scroll down to the YELLOW bar... then scroll down on MODELS ... https://www.m-and-d.com/Tecumseh_parts.html

........http://www.mtdparts.com/equipment/mtdparts/equipment-store/equipment-store-categories/equipment-snow-blowers

...http://www.mtdparts.com/equipment/mtdparts/accessories-and-attachments/snow-thrower-attachments

...https://support.mtdparts.com/s/article/10584-1 https://support.mtdparts.com/s/topic/0TOA00000004vGQOAY/customer-support

.......https://support.mtdparts.com/s/article/133-1

Welcome Randy, we always enjoy having new members, .. Just in case you may ever need help from the forums, Please be kind enough to provide us with some information about your machine (see example) JD 970 is your machines SERIES number, NOT enough help !

REMEMBER : I'm only the messenger ..... you can click on SOME of the pics and graphs .... https://www.protoolreviews.com/buying-guides/best-cordless-blower-shootout/32078/?utm_source=newsletter&utm_medium=email&utm_campaign=the_very_best_of_pro_tool_reviews_2017&utm_term=2018-01-04