Search results

Outer coner Fitted

Rear of base showing gap

Hi Guys, Have now moved onto looking at stripping down and cleaning/reassbling my Kohler cone clutch on a K141. Spec: 29402D Serial 5217622 Managed to get the seized clutch cover off and removed the clutch itself. I stripped down the clutch after removing the screws which in itself was a...

OK thank you that makes sense

Rivets, thanks for your continuing help. I know this sounds like a daft question, but I don't know what the 12 X 24 or 12 X 32 screw measurements actually are. Does the 12 mean diameter and the 24 or 32 mean length?

Yes theold style with oil in the bottom of it

Model K141T Spec 29402D Serial 5217622

I have a photo of the elbow but can't seem to attach it to this thread can you help?

Thanks Rivets, I'm looking at the elbow manifold at the moment and it appears it needs studs that are approx. 3" long. Where would I be abe to get these from?

It's a Kohler K141

Air intake elbow pic

Air intake elboe stud size query

Stud size query

Air Intake Elbow_1

Air Intake Elbow_2

This time regarding the 2 studs that fit through the elbow intake tube to the carb itself. What size are these two studs as they were thrown away before I got hold of the motor?

Thanks Bert, probably the best bet but will have to wait for the shut down before I can ask

It's at times like this that I wish we lived in the USA rather than the UK as we cannot get anything like this here. We have to rely on Amazon, e-bay or other online suppliers. Would love to buy in the USA but the P&P plus import duties make everything very expensive

Also it looks like I may have to re cut the valve seat, again does anyone have the specs for this please. angle etc?

Last part of my K141 motor and see the valve clearance to too high, (0.020+), on both exhaust and intake valves. I've lapped both in but before I close the lid wanted to know if it's worth buying replacement valves. Does anyone have the spec on the valve overall lengths as I can't find it...

From an engine bought for spares and not needed.

Is there anywhere on the site that I can post items for sale? I have a load of kohler K141 parts to sale and would like to offer them to members rather than put them on e-bay. Cheers, TC

OK Rivets can now open using chrome, thanks for your time and help, looks like I need new valves!

Yes I can

LOL

Thanks Rivets I'll try to open it. Appreciate you help.

Have downloaded the file but still can't open it so must be a problrem my end, I'll have a look as to why I can't open it. Does it explain how to lap etc?

Just tried again and it won't open, can you send another way?

Thanks Rivets, unfortunately this won't open?

So, the debacle continues! About to remove the valves on my K141 and have noticed there is a large gap already on the valve clearance even before I lap the valves in. There is no adjustment on this motor, so not quite sureof the way forwards. Would I be right in thinking when I lap the valves...

Thanks MM, now found one on e-bay

Sorry should have stated I'm in the UK, in the south part

Kohler K141 carburetor L inlet adapter, what are the screw size that hold the L shaper inlet adapter to the carb? I tried 4mm metric but it's not that? The 2 screws are about 3" inch long if that helps. TC

Does anyone have a valve spring compressoe that I could borrow/buy please? This is the type I'd like if there is one available. They are listed on e-bay but all from the states meaning with duty and P&P they are a ridiculous price...

Thanks MM, I've got a couple of thread files from years ago which never got used but niether seem to have the match and each has 8 different sides. I'm wondering and pretty sure I'm right the thread has a slight taper so that it ake a good seal, if it might have a fine pipe thread?

Here's a pic of the union I'm looking for

Here's a pic

Carburetor_Inlet

Near to end of rebuilding my Kohler K141 motor, now find I need a new/replacment fuel union to fit to carb as the original seems to have picked up the aluminum thread and I can't clean the thread, does anyone have a spare?

Thanks guys, looks like I guessed right

I Have pics but the site says they are too big, I'll post them if someone lets me know how

OK I'll take a look. At the moment I have the cowl on top of the spacers then the tank support on top of them

OK, so I know I should have taken a photo when I removed the head, but I didn't, DOH! Can't for the life of me rememeber where the spacers go, tried to find a schematic but there doesn't appear to be one antwhere in the ether, can anyone help please? TC